Motion of break arcs driven by external magnetic field is observed using a high-speed camera. The magnetic field is applied with a permanent magnet. Experimental circuit is DC42 V-10 A resistive circuit. Material of electrical contacts is silver. Following results are shown. The break arcs are driven in the direction according to Lorentz force. The arc duration decreases with decrease of the distance between the electrical contacts and the magnet. When the external magnetic-flux density at the position of the break arc is lower than a certain value, the effect of the magnetic field to drive the break arc becomes ineffective to shorten the arc duration. The result is explained with a relationship between the motion of break arc and the distribution of the external magnetic field.

To predict the thermal behavior of switchgear quickly, the Thermal Network Finite Difference Analysis method (TNFDA) is adopted in thermal analysis of AC contactor in the paper. The thermal network model is built with nodes, thermal resistors and heat generators, and it is solved using finite difference method (FDM). The main circuit and the control system are connected by thermal resistors network, which solves the problem of multi-sources interaction in the application of TNFDA. The temperature of conducting wires is calculated according to the heat transfer process and the fundamental equations of thermal conduction. It provides a method to solve the problem of boundary conditions in applying the TNFDA. The comparison between the results of TNFDA and measurements shows the feasibility and practicability of the method.

Short-time withstand current is one of the crucial nominal parameters in air circuit breaker. A numerical method to evaluate the short-time withstand current is proposed. Cylindrical current carrying bridge is introduced to describe the contact spot between movable and fixed contacts. Taking into account the action of ferromagnetic splitter plates, the variation of the conductor properties with temperature and the variation of contact spot radius with the electro-dynamic repulsion force, a transient finite element calculation model is developed by coupling the electromagnetic field and thermal field. The loaded short circuit current is considered as the short-time withstand current once the highest temperature is near to the melting point of the contact material. It demonstrates that the method is useful to evaluate the performance of the air circuit breaker.

In this paper, a new compensation scheme and a corresponding pass element structure for a CMOS low-dropout regulator (LDO) are presented. The proposed approach effectively alleviates the strict stability constraint on the ESR of the output capacitor. Stability of a CMOS LDO with the conventional compensation requires the effective series resistance (ESR) of the output capacitor in a tunnel-like region. With the proposed design approach, an LDO can be stable using an output capacitor without ESR. A 2.5 V/150 mA LDO has been implemented using a 0.5-µm 1P2M CMOS process. The experimental results illustrate that the proposed LDO is stable with an output capacitor of 0.33 µF and no ESR.

At high signal frequencies (i.e. in the GHz range), a connector must be considered as part of an electromagnetic transmission line. At these frequencies, the impedance characteristics of the connector stemming from the distributed inductance and capacitance of pins and the associated wiring, must be carefully controlled; insertion losses must be minimized and undesirable coupling between non-neighboring pins giving rise to crosstalk must be avoided to achieve optimal signal transmission. This paper reviews fundamental issues associated with the performance optimization of multi-conductor connector structures for high speed signal transmission. The paper complements an earlier publication that reviewed the major factors affecting electrical contact resistance at high frequencies [1].

The manifold-ranking algorithm has been successfully adopted in content-based image retrieval (CBIR) in recent years. However, while the global low-level features are widely utilized in current systems, region-based features have received little attention. In this paper, a novel attention-driven transductive framework based on a hierarchical graph representation is proposed for region-based image retrieval (RBIR). This approach can be characterized by two key properties: (1) Since the issue about region significance is the key problem in region-based retrieval, a visual attention model is chosen here to measure the regions' significance. (2) A hierarchical graph representation which combines region-level with image-level similarities is utilized for the manifold-ranking method. A novel propagation energy function is defined which takes both low-level visual features and regional significance into consideration. Experimental results demonstrate that the proposed approach shows the satisfactory retrieval performance compared to the global-based and the block-based manifold-ranking methods.

In multi-hop wireless networks, communication quality depends on the route from a source to a destination. In this paper, we consider a one-dimensional multi-hop wireless network where nodes are distributed randomly and theoretically analyze the relation between communication quality and routing policy using a measure called the Expected Transmission Count (ETX), which is the predicted number of data transmissions required to send a packet over that link, including retransmissions. First, we theoretically analyze the mean length of links, the mean number of hops, and the mean route ETX, which is the sum of the ETXs of all links in a route, of Longest Path Routing (LPR), and Shortest Path Routing (SPR). Second, we propose Adjustable Routing (AR), an approximation to Optimum Routing (OR), which minimizes route ETX. We theoretically compute the above characteristic values of AR. We also theoretically compute a lower bound of the mean route ETX of OR. We compare LPR, SPR, and OR using the results of analyses and show differences between these algorithms in the route ETX.

In this letter a new structure of multifunctional frequency filter using a universal voltage conveyor (UVC) is presented. The multifunctional circuit can realize a low-pass, high-pass and band-pass filter. All types of frequency filter can be realized as inverting or non-inverting. Advantages of the proposed structure are the independent control of the quality factor at the cut-off frequency and the low output impedance of output terminals. The computer simulations and measuring of particular frequency filters are depicted.

In this letter, a new concept of life log retrieval using human brain activities is presented. The non-invasive electroencephalogram (EEG) recording was applied to have P300 evoked potentials during the photo retrieving tasks. Three subjects tried to select the photo images that interest them among nine according to their mental states. It was found that with four times EEG averaging, the performances of target photo selections could reach 90% for two subjects. This concept would be applicable in future to achieve intuitive retrieval of life log with large quantities of data.

The main idea in perceptual image compression is to remove the perceptual redundancy for representing images at the lowest possible bit rate without introducing perceivable distortion. A certain amount of perceptual redundancy is inherent in the color image since human eyes are not perfect sensors for discriminating small differences in color signals. Effectively exploiting the perceptual redundancy will help to improve the coding efficiency of compressing color images. In this paper, a locally adaptive perceptual compression scheme for color images is proposed. The scheme is based on the design of an adaptive quantizer for compressing color images with the nearly lossless visual quality at a low bit rate. An effective way to achieve the nearly lossless visual quality is to shape the quantization error as a part of perceptual redundancy while compressing color images. This method is to control the adaptive quantization stage by the perceptual redundancy of the color image. In this paper, the perceptual redundancy in the form of the noise detection threshold associated with each coefficient in each subband of three color components of the color image is derived based on the finding of perceptually indistinguishable regions of color stimuli in the uniform color space and various masking effects of human visual perception. The quantizer step size for the target coefficient in each color component is adaptively adjusted by the associated noise detection threshold to make sure that the resulting quantization error is not perceivable. Simulation results show that the compression performance of the proposed scheme using the adaptively coefficient-wise quantization is better than that using the band-wise quantization. The nearly lossless visual quality of the reconstructed image can be achieved by the proposed scheme at lower entropy.

Some OFDMA-based wireless commuication systems, e.g., Wireless Broadband Internet (WiBro) or Worldwide interoperability for Microwave Access (WiMAX), support frequency reuse of 1 to maximize spectral efficiency. One of the efficient methods to reduce co-channel interference (CCI) caused by frequency reuse is fractional frequency reuse (FFR). In this paper, we propose and validate a novel frequency partitioning method and subcarrier assignment mechanism to improve system and individual capacity of mobile systems using FFR.

The spectral efficiency of cooperative relaying in interference-limited environments in which a given channel is spatially reused is investigated. Cooperative relaying is a promising technique that uses neighboring stations to forward the data toward the destination in order to achieve spatial diversity gain. It has been reported that by introducing cooperative relaying into communication between an isolated source-destination pair, the error rate or spectral efficiency is generally improved. However, it is not intuitively clear whether cooperative relaying can improve the performance in interference-limited environments because the simultaneous transmission of multiple stations increases the number of interference signals. Assuming the most fundamental cooperative relaying arrangement, which consists of only one relay station, numerical results reveal that cooperative relaying is not always superior to non-cooperative single-hop and two-hop transmissions in terms of spectral efficiency.

This paper studies two kinds of simple switched dynamical systems with piecewise constant characteristics. The first one is based on the single buck converter whose periodic/chaotic dynamics are analyzed precisely using the piecewise linear phase map. The second one is based on a paralleled system of the buck converters for lower voltages with higher current capabilities. Referring to the results of the single system, it is clarified that stable multi-phase synchronization is always possible by the proper use of the switching strategies and adjustment of the clock period. Presenting a simple test circuit, typical operations are confirmed experimentally.

Gas or water leaks in pipes that are buried under ground or that are situated in the walls of buildings may occur due to aging or unpredictable accidents, such as earthquakes. Therefore, the detection of leaks in pipes is an important task and has been investigated extensively. In the present paper, we propose a novel leak detection method by means of acoustic wave. We inject an acoustic chirp signal into a target pipeline and then estimate the leak location from the delay time of the compressed pulse by passing the reflected signal through a correlator. In order to distinguish a leak reflection in a complicated pipeline arrangement, the reflection characteristics of leaks are carefully discussed by numerical simulations and experiments. There is a remarkable difference in the reflection characteristics between the leak and other types of discontinuity, and the property can be utilized to distinguish the leak reflection. The experimental results show that, even in a complicated pipe arrangement including bends and branches, the proposed approach can successfully implement the leak detection. Furthermore, the proposed approach has low cost and is easy to implement because only a personal computer and some commonly equipment are required.

In this letter, we propose a new histogram equalization method to compensate for acoustic mismatches mainly caused by corruption of additive noise and channel distortion in speech recognition. The proposed method employs an improved test cumulative distribution function (CDF) by more accurately smoothing the conventional order statistics-based test CDF with the use of window functions for robust feature compensation. Experiments on the AURORA 2 framework confirmed that the proposed method is effective in compensating speech recognition features by reducing the averaged relative error by 13.12% over the order statistics-based conventional histogram equalization method and by 58.02% over the mel-cepstral-based features for the three test sets.

In this paper, we propose new joint transport and MAC protocols for ad hoc wireless networks based on an optimization framework. To overcome the practical and efficiency limitations of previous research, we develop a different framework based on independent sets and propose an implementable heuristic algorithm. We address the implementation issues of the proposed algorithm. Simulation results confirm the efficiency and fairness of our protocols.

We propose a new large-scale logic test element group (TEG), called a flip-flop RAM (FF-RAM), to improve the total process quality before and during initial mass production. It is designed to be as convenient as an SRAM for measurement and to imitate a logic LSI. We implemented a 10 Mgates FF-RAM using our 65-nm CMOS process. The FF-RAM enables us to make fail-bit maps (FBM) of logic cells because of its cell array structure as an SRAM. An FF-RAM has an additional structure to detect the open and short failure of upper metal layers. The test results show that it can detect failure locations and layers effortlessly using FBMs. We measured and analyzed it for both the cell arrays and the upper metal layers. Their results provided many important clues to improve our processes. We also measured the neutron-induced soft error rate (SER) of FF-RAM, which is becoming a serious problem as transistors become smaller. We compared the results of the neutron-induced soft error rate to those of previous generations: 180 nm, 130 nm, and 90 nm. Because of this TEG, we can considerably shorten the development period for advanced CMOS technology.

This letter presents a method that offers the simple calculation of the electric shielding effectiveness of a collinear unequal narrow slot array in a planar conducting screen. An integral equation for an aperture electric field on the unequal narrow slot array is used instead of coupled integral equations for a multiple slot and solved by applying Galerkin's method of moments. Numerical results illustrate the shielding effectiveness and aperture electric field distributions of the collinear unequal two-narrow slot array by using single integral equation.

In this letter, a new estimation filtering is proposed when a delay between signal generation and signal estimation exists. The estimation filter is developed under a maximum likelihood criterion using only the finite observations on the delay interval. The proposed estimation filter is represented in both matrix form and iterative form. It is shown that the filtered estimate has good inherent properties such as time-invariance, unbiasedness and deadbeat. Via numerical simulations, the performance of the proposed estimation filtering is evaluated by the comparison with that of the existing fixed-lag smoothing, which shows that the proposed approach could be appropriate for fast estimation of signals that vary relatively quickly. Moreover, the on-line computational complexity of the proposed estimation filter is shown to be maintained at a lower level than the existing one.

In multiple-input multiple-output (MIMO) wireless systems, the receiver must extract each transmitted signal from received signals. Iterative signal detection with belief propagation (BP) can improve the error rate performance, by increasing the number of detection and decoding iterations in MIMO systems. This number of iterations is, however, limited in actual systems because each additional iteration increases latency, receiver size, and so on. This paper proposes a convergence acceleration technique that can achieve better error rate performance with fewer iterations than the conventional iterative signal detection. Since the Log-Likelihood Ratio (LLR) of one bit propagates to all other bits with BP, improving some LLRs improves overall decoder performance. In our proposal, all the coded bits are divided into groups and only one group is detected in each iterative signal detection whereas in the conventional approach, each iterative signal detection run processes all coded bits, simultaneously. Our proposal increases the frequency of initial LLR update by increasing the number of iterative signal detections and decreasing the number of coded bits that the receiver detects in one iterative signal detection. Computer simulations show that our proposal achieves better error rate performance with fewer detection and decoding iterations than the conventional approach.