This paper clarifies the effects of metal wires placed around a Multiple-Input-Multiple-Output (MIMO) array with the goal of improving the channel capacity in near-field MIMO systems. Tests are performed on dual-dipole arrays with metal wires placed parallel to the dipoles. If the antenna elements have an appropriate half-power beamwidth (HPBW), there is a clear improvement in the channel capacity of the dual-dipole array. The metal wires are used to increase the multipath richness and the locations of the wires significantly impact the channel capacity. A significant increase in the channel capacity is observed even if only one metal wire is placed in the proper location. We verified the generality of applying a metal wire to improve the channel capacity and that the improvement in the channel capacity is approximately proportional to the number of metal wires.

This paper proposes a novel blind multiuser detection scheme using CMA (Constant Modulus Algorithm) adaptive array. In the proposed scheme, the received signal is processed in two steps. In the primary step, only one user is captured by the CMA adaptive array, and at the same time, the other users' directions of arrival (DOA) are estimated. In the secondary step, initial weight vectors are set based on the estimated DOAs, and it processes with CMAs again to capture the other users in parallel. Thus, all the users are detected exactly and recovered separately. The Least-squares CMA is applied as an optimization algorithm to improve the performance of the proposed scheme, and the performances using the proposed scheme with linear arrays and circular arrays are discussed in detail. Simulation results are presented to verify the performance of the proposed scheme.