In this study, we investigate outdoor propagation measurements performed in an industrial park environment at 28.3GHz band. The propagation characteristics were evaluated with the measurement result regarding the path loss characteristics. Ray tracing simulation was also studied and compared with the measurement data to evaluate the quantitative accuracy of ray tracing in millimeter-wave band wireless propagations. Ray tracing, whose accuracy was evaluated based on a comparison with the measurement results, can aid in the theoretical design of the coverage area and deterministic channel modeling.

For the modeling of multipath propagation in every wireless systems, the ray tracing method has been widely studied. However, large errors may result due to the approximation of geometrical optics in curved surfaces. This paper therefore focused on the curved surfaces and edges, which are difficult to handle in ray tracing. Examples of curved surfaces can be found in arched cross-section tunnels which are common in highway networks of mountainous areas. The traditional ray tracing method of dividing the curved surface into smaller flat plates is not so accurate as the size of smaller plates may not satisfy the geometrical optics assumption, and the reflection point which satisfies Fermat's principle may not exist. In this work, a new ray tracing method is proposed with 2 contributions. The first one is the implementation of the reflection coefficient for curved surfaces in ray tracing. The second is applying the physical optics method on the caustics region. To evaluate these methods, path gain simulation results for an arched cross-section model are compared with measurements made inside an arched tunnel. To further improve the simulation results, the effect of rough surface is introduced, and the results are again compared with measurement.