We have developed a 2 GHz band superconducting 8-pole tunable quasi-elliptic function filter on sapphire substrate. The tunable filter has a sharp skirt characteristic by transmission zeros. And the tunable filter uses a low-cost substrate of sapphire. An adjustment of center frequency for the filter is realized by a tunable technique with a piezoelectric bending actuator. The tunable filter realized center frequency shift of 7.62 MHz with conditions of bandwidth change of 0.5% and ripple change of 0.25 dB. Center frequency of the 8-pole quasi-elliptic function filter agreed with the designed value. Given these features, a superconducting filter with a sharp skirt characteristic for next-generation mobile RF applications is expected to be realized by applying these filters.

2 GHz band electrically tunable superconducting microstrip line band-pass filter was developed. The tunable filter used a thin interdigital electrode. The dielectric distribution of SrTiO3 substrate included a calculated nonlinear effect of the electrode and ferroelectric material. As a result, the tunable microstrip line filter design with interdigital electrode enabled calculation by the finite element method and the moment method. The tunable filter with a measured unloaded Q factor of 9700 and a frequency shift of 1.25 MHz was obtained.

We developed a compact rf receiver subsystem using a high-Tc superconducting sharp skirt band-pass filter with a center frequency tuning function. A 24-pole hairpin-type 2 GHz microstrip-line filter was fabricated with YBa2Cu3Oy thin films deposited on a LaAlO3 substrate. Attenuation characteristics were more than 30 dB at 1 MHz apart from both the lower and the higher pass-band edges. For center frequency tuning, a 1-mm-thick dielectric sapphire plate was stacked on the filter, and the filtering characteristics were tuned by moving the plate using a piezoelectric bending actuator. The range of the center frequency modulation was more than 12 MHz with no degradation of the low-loss and sharp-skirt characteristics.

Logic operations in principle have been demonstrated based on the planar high-Tc Superconducting QUantum Interference Device (SQUID). Two kinds of logic gates were produced by using the focused ion beam (FIB) superconducting weak links fabricated in NdBa2Cu3O7-δ (NBCO) thin films. Logic gates investigated in this paper are (1) an rf-SQUID based logic gate which utilizes threshold characteristics, and (2) a dc-SQUID based logic gate which is an elementary gate of RSFQ circuits. Elementary logic operation such as (1) AND/OR logic and (2) SET-RESET flip-flop operation were successfully obtained in the logic gates. In addition to the present experimental results, some problems and future prospects are also discussed.