In this letter a new active element the Current Follower Transconductance Amplifier (CFTA) for the realization of the current-mode analog blocks is presented. The element is a combination of the Current Follower (CF) and the Balanced Output Transconductance Amplifier (BOTA). Possible internal structure of the CFTA is presented. The usage of the new active element is shown on the design of the Kerwin-Huelsman-Newcomb (KHN) structure working in the current mode. The frequency filter using the CFTA elements has been designed using the signal-flow graphs. The circuit structure employs three CFTA elements and two grounded passive elements. The filter enables realizing not only the basic functions as the low- (LP), band- (BP) and high-pass (HP) but also the notch and all-pass (AP) filter. The advantage of the structure presented is that the outputs of the filter are at high impedance and hence it is not necessary to use other auxiliary active elements. The properties of the filter proposed were verified by sensitivity and AC analyses in the PSPICE program.

In this letter a new structure of multifunctional frequency filter using a universal voltage conveyor (UVC) is presented. The multifunctional circuit can realize a low-pass, high-pass and band-pass filter. All types of frequency filter can be realized as inverting or non-inverting. Advantages of the proposed structure are the independent control of the quality factor at the cut-off frequency and the low output impedance of output terminals. The computer simulations and measuring of particular frequency filters are depicted.