As use of the Internet continues to spread rapidly, Traffic Engineering (TE) is needed to optimize IP network resource utilization. In particular, load balancing with TE can prevent traffic concentration on a single path between ingress and egress routers. To apply TE, we have constructed an MPLS (Multi-Protocol Label Switching) network with TE capability in the JGN (Japan Gigabit Network), and evaluated dynamic load balancing behavior in it from the viewpoint of control stability. We confirmed that with this method, setting appropriate control parameter values enables traffic to be equally distributed over two or more routes in an actual large-scale network. In addition, we verified the method's effectiveness by using a digital cinema application as input traffic.

A high-speed data communication service such as inter-LAN is one of many services possible with ATM-based B-ISDN. Design objectives were to simplify the connection setup procedure, to ensure efficient utilization of network capacity, and to reduce delay in servers. These objectives were met in a B-ISDN service trial system featuring distributed connectionless servers connected by permanent virtual channels and cell-by-cell processing in the connectionless server. The system's eight connectionless servers accommodate up to 256 subscriber network interfaces. The authors discuss how multicast can be provided in ATM-based connectionless data networks for inter-LAN communications. Four possible configurations, distinguished by copy function (multicast/broadcast) and on functional arrangement in the inter-connectionless server network (centralized/distributed), are presented. The configurations are compared from perspectives of required hardware and network capacity. The distributed broadcast function is shown the most reasonable solution.