LSIs are generally designed through four stages including architectural design, logic design, circuit design, and physical design. In architectural design and logic design, designers describe their target hardware in RTL. However, they generally use different languages for each phase. Typically a general purpose programming language such as C or C++ and a hardware description language such as Verilog HDL or VHDL are used for architectural design and logic design, respectively. That is time-consuming way for designing a hardware and more efficient design environment is required. In this paper, we propose a new hardware modeling and high-speed simulation environment for architectural design and logic design. Our environment realizes writing and verifying hardware by one language. The environment consists of (1) a new hardware description language called ArchHDL, which enables to simulate hardware faster than Verilog HDL simulation, and (2) a source code translation tool from ArchHDL code to Verilog HDL code. ArchHDL is a new language for hardware RTL modeling based on C++. The key features of this language are that (1) designers describe a combinational circuit as a function and (2) the ArchHDL library realizes non-blocking assignment in C++. Using these features, designers are able to write a hardware transparently from abstracted level description to RTL description in Verilog HDL-like style. Source codes in ArchHDL is converted to Verilog HDL codes by the translation tool and they are used to synthesize for FPGAs or ASICs. As the evaluation of our environment, we implemented a practical many-core processor in ArchHDL and measured the simulation speed on an Intel CPU and an Intel Xeon Phi processor. The simulation speed for the Intel CPU by ArchHDL achieves about 4.5 times faster than the simulation speed by Synopsys VCS. We also confirmed that the RTL simulation by ArchHDL is efficiently parallelized on the Intel Xeon Phi processor. We convert the ArchHDL code to a Verilog HDL code and estimated the hardware utilization on an FPGA. To implement a 48-node many-core processor, 71% of entire resources of a Virtex-7 FPGA are consumed.

Sorting is an extremely important computation kernel that has been accelerated in a lot of fields such as databases, image processing, and genome analysis. Given that advent of Internet of Things (IoT) era due to mobile technology progressions, the future needs a sorting method that is available on any environment, such as not only high performance systems like servers but also low computational performance machines like embedded systems. In this paper, we present an FPGA-based sorting accelerator combining Sorting Network and Merge Sorter Tree, which is customizable by means of tuning design parameters. The proposed FPGA accelerator sorts data sent from a host PC via the PCIe bus, and sends back the fully sorted data sequence to it. We also present a detailed analytical model that accurately estimates the sorting performance. Due to these characteristics, designers can know how fast a developed sorting hardware is in advance and can implement the best one to fulfill the cost and performance constraints. Our experiments show that the proposed hardware achieves up to 19.5x sorting performance, compared with Intel Core i7-3770K operating at 3.50GHz, when sorting 256M 32-bits integer elements. However, this result is limited because of insufficient memory bandwidth. To overcome this problem, we propose a data compression mechanism and the experimental result shows that the sorting hardware with it achieves almost 90% of the estimated performance, while the hardware without it does about 60%. In order to allow every designer to easily and freely use this accelerator, the RTL source code is released as open-source hardware.