This paper presents improvement of port-to-port isolation characteristics of a linearly dual-polarized dual-band and wideband multi-ring microstrip antenna (MR-MSA) fed by two L-probes. The linearly dual-polarized dual-band and wideband MR-MSA consists of two circular ring patches and two L-probes arranged in a multi-layered dielectric substrate. By using a thick substrate for the L-probe and arranging two ring patches as radiation elements, the proposed antenna operates wideband and dual-band characteristics. Furthermore, by arranging two L-probes at the orthogonal positions, the proposed antenna can radiate dual linear polarizations. In this paper, for improving port-to-port isolation characteristics of the linearly dual-polarized dual-band and wideband MR-MSA fed by two L-probes, a via connected to the ground plane at the center of the radiation elements is arranged. The fractional bandwidths below -10dB reflection obtained by the simulation of the MR-MSA with the via were 17.0% and 14.4%. Furthermore, the simulated isolation characteristics were more than 21.0dB and 17.0dB in the two bands. Improvement of the isolation characteristics between two ports as well as the dual-band and wideband performance of the proposed MR-MSA with the via were confirmed by the simulation and the measurement.

This paper presents the design and measurement of wideband multi-ring microstrip antennas fed by an L-probe for single- and dual-band operation. The proposed antennas consist of one or two square ring patches and an L-probe arranged in a multi-layered dielectric substrate. By using a thick substrate for the L-probe and optimizing the distances between the L-probe and the patches, wideband performance is successfully achieved. The optimal substrate thickness of the L-probe and patches to obtain good wideband performance were determined, and prototype antennas for single- and dual-band operation were fabricated and tested. The measured fractional bandwidths corresponding to reflection coefficients below -10dB were 46.1% for the single-band antenna and 20.3% and 15.7% for the dual-band antenna. The measured gains of the test antennas in the above bandwidths were 0-6.9dBi for the single-band antenna and 3.0-8.6dBi for the dual-band antenna. Although the E-plane radiation patterns were slightly tilted against the frequency, stable broadside radiation was confirmed. The proposed antennas exhibited excellent performance as wideband planar antennas for single- and dual-band operation. The proposed wideband antennas can be easily extended to a dual linearly polarized antenna by using another L-probe in the orthogonal position.

This paper presents design and radiation properties of a radial line microstrip antenna array (RL-MSAA) for linear polarization. A stacked circular microstrip antenna (C-MSA) is used as a radiation element for the RL-MSAA. Radiation phase of the stacked C-MSA is controlled by tuning radii of the lower and upper patches, therefore, the desired phase distribution of the RL-MSAA can be designed. In this paper, a linearly polarized RL-MSAA with three concentric rows of the stacked C-MSAs at a spacing of 0.65 wavelengths for uniform aperture distribution is designed and tested in 12GHz. The experimental results reveal that validity of the linearly polarized RL-MSAA with the stacked C-MSAs for radiation phase control is demonstrated.

This paper presents the design and radiation properties of a linearly polarized radial line microstrip antenna array (RL-MSAA) with U-slot circular microstrip antennas. A circular microstrip antenna (C-MSA) with U-shaped slot is used as a radiation element of the RL-MSAA. Radiation phase of the U-slot C-MSA is controlled by tuning the radius of the C-MSA and dimensions of the U-slot on the C-MSA; therefore, the desired phase distribution of the RL-MSAA can be realized. In this paper, a linearly polarized RL-MSAA with three concentric rows of C-MSAs at a spacing of 0.65 wavelengths is designed for 12GHz operation. In order to realize uniform phase distribution, the U-slot C-MSAs are arranged for inner two rows and normal C-MSAs are arranged for the termination row. Validity of the linearly polarized RL-MSAA with the U-slot C-MSAs for radiation phase control is demonstrated by simulation and measurement.