This paper investigates a signal area (SA) estimation method for wideband and long time duration spectrum measurements for dynamic spectrum access. SA denotes the area (in time/frequency domain) occupied by the primary user's signal. The traditional approach, which utilizes only Fourier transform (FT) and energy detector (ED) for SA estimation, can achieve low complexity, but its estimation performance is not very high. Against this issue, we apply post-processing to improve the performance of the FT-based ED. Our proposed method, simple SA (S-SA) estimation, exploits the correlation of the spectrum states among the neighboring tiles and the fact that SA typically has a rectangular shape to estimate SA with high accuracy and relatively low complexity compared to a conventional method, contour tracing SA (CT-SA) estimation. Numerical results will show that the S-SA estimation method can achieve better detection performance. The SA estimation and processing can reduce the number of bits needed to store/transmit the observed information compared to the FT-based ED. Thus, in addition to improved detection performance it also compresses the data.

We create a practical method to set the segment size of the Welch FFT for wideband and long-term spectrum usage measurements in the context of hierarchical dynamic spectrum access (DSA). An energy detector (ED) based on the Welch FFT can be used to detect the presence or absence of primary user (PU) signal and to estimate the duty cycle (DC). In signal detection with the Welch FFT, segment size is an important design parameter since it determines both the detection performance and the frequency resolution. Between these two metrics, there is a trade-off relationship which can be controlled by adjusting the segment size. To cope with this trade-off relationship, we define an optimum and, more easy to analyze sub-optimum segment size design criterion. An analysis of the sub-optimum segment size criterion reveals that the resulting segment size depends on the signal-to-noise ratio (SNR) and the DC. Since in practice both SNR and DC are unknown, proper segment setting is difficult. To overcome this problem, we propose an adaptive segment size selection (ASSS) method that uses noise floor estimation outputs. The proposed method does not require any prior knowledge on the SNR or the DC. Simulation results confirm that the proposed ASSS method matches the performance achieved with the optimum design criterion.

Cognitive radio (CR) systems aim for more efficient spectrum utilization by having so called secondary users (SUs) transmit on a frequency band reserved for licensed primary users (PUs). The secondary transmissions are allowed provided that no harmful interference will be caused to the PUs. SU terminals with multiple antennas can employ transmit power control with transmit precoding in order to control the interference levels. In most of the existing works, perfect channel state information (CSI) is assumed to be available for the SUs. However, in practical systems where perfect CSI is not available, the SUs are not able to guarantee that the interference constraints are sufficiently satisfied. In this paper, we investigate the problem of spectrum sharing for multiantenna CR systems using estimated CSI. Due to the random nature of the estimation error, we set a probabilistic interference constraint and, in order to satisfy it, provide a density function for the interference power. In addition, we present a power control framework for the SU to meet the probabilistic interference constraint.