The use of existing metallic local line facilities is being studied for the provision of high-speed digital transmission services. Local line characteristics have to be modeled in the form of the objective requirements that should be met by DSL for estimating the feasibility of the service provision in the actual network. This paper presents the results of a study that models the metallic media characteristics of NTT's local network. First, the line lenghts determined by the existing local line deployment rule and the cable types used in the networks are introduced. Second, the values of crosstalk characteristics, the most significant factors in limiting DSL range, are given by classifying essential line conditioning states of each cable. The values of crosstalk characteristics are newly computed by taking into account detailed cable pair-binding (cabling) structures, and the worst case values among all possible combinations of multiple inter-pair interfering-interfered relationships within a cable are given though a previous study approximated cable pair-binding structures. The crosstalk characteristics of NTT's and American local networks are also compared. A modified approximate equation of line propagation characteristics is also proposed for representative local lines, and its precision is verified by comparing simulation results to actual measurements in both frequency and time domains.

The use of existing metallic local line facilities is being studied for providing "video on demand (VOD)" services to residential subscribers across asymmetric digital subscriber lines (ADSL). ADSL carries a high-rate channel in the downstream direction from a central office (CO) to the subscriber, and a low-rate channel in both directions on an existing 2-wire pair. Audio and video signals are compressed by the moving picture experts group's standardized algorithms (MPEG 1 and MPEG 2), and delivered to the subscriber in the high-rate channel. Control (demand and response) signals are transceived in the low-rate channel. This paper presents the line length coverage of ADSL systems given the environment of NTT's local networks. The bit rates in the downstream and upstream directions are assumed to be 1.6-9.2Mbit/s and 24kbit/s, respectively. Two types of ADSL systems are considered: transceiving ADSL signals using the plain old telephone service (POTS) line or the basic rate access (BRA; 320 kbaud ping-pong transmission system) line on the same 2-wire pair. 16-QAM, 32-QAM and 64-QAM are compared as transmission schemes. Intra-system crosstalk interference (interference between identical transmission systems) and inter-system crosstalk interference (interference between different transmission systems) with the existing digital subscriber lines (DSL) are estimated. It is shown that the inter-system crosstalk interference with BRA is most stringent, and ADSL with 16-QAM yields the best performance in NTT's local networks. This paper concludes that realizing ADSL with 16-QAM can achieve channel capacities of up to 9.2Mbit/s for fiber-in-the-feeder (FITF) access systems, but the possibility of applying ADSL to direct access systems is remote except for a restricted short haul use. Some comparisons regarding American local networks are also described.

This paper proposes a novel universal line termination scheme for the ONUs (optical network units) of fiber-optic local access systems. Its main feature is that only low cost AD/DA converters for Hi-Fi audio are needed. Because audio AD/DA converters are insufficient for ISDN basic rate access (● 320kbaud) and cause waveform distortion, we develop a simple detection algorithm that does not use any equalizing filter. The algorithm can handle plural channels with one general purpose MPU (micro-processing unit). Based on this, a novel architecture for a fiber-optic local access system is presented that removes the MPUs from each optical network unit (ONU) and places them in the central office (CO). The proposed system yields a small, service-uniform ONU that supports a wide range of narrow-band services (POTS & ISDN) with no distinction. To realize this system at the lowest possible cost, a high-speed code division multiplexing (CDM) scheme with novel code word sets is developed.