This paper describes the design, characteristics, and applications of newly developed latching-type 1 2 and 1 8 single-mode fiber switches. These switches have been successfully fabricated using micromachine technology. To reduce insertion loss and light reflection, an index-matching oil is injected into the switches. The fabricated 1 2 switches exhibit a low insertion loss of 0.31 dB, high return loss of 51 dB, relatively fast switching speed of 2 ms, and low driving power of 9 mw. Switching operation is stable over 108 switching times. A practical 1 8 single-mode fiber switch was also constructed using seven 1 2 switches cascaded in three stages. The fabricated 1 2 and 1 8 switches have been applied to an NTT multichannel video distribution FTTH system to enhance system reliability.

This paper describes the fabrication of micro-pipes and their applications to splicing parts and optical switches using single-mode fibers. Micro-pipes having almost the same inner diameter of bare fiber (125 µm) and lengths of around 5 mm are successfully mass-produced by using micromachining technology. We fabricate various kinds of metal pipes such as Au, Cu, Ni, and an FeNi alloy by selecting the appropriate electro-plating bath. We use an Au micro-pipe having a small slitted portion running along its axis (slitted micro-pipe) to splice single-mode fibers. We also use an FeNi alloy micro-pipe to construct a single-mode fiber switch. These new single-mode fiber devices employing micro-pipes show excellent optical and mechanical characteristics. Splicing losses are in the range of 0.2-0.4 dB. The developed 1 2 latching type single-mode fiber switches exhibit a low insertion loss of 0.35 dB, a minimum switching speed of 2 ms with a driving power of 9 mW, and stable operation for more than 108 switchings without damage. A practical application of the developed switch for testing optical devices is also demonstrated.

We propose a mechanically tunable passively mode-locked semiconductor laser with a high repetition rate using a simple configuration with a moving mirror located very close to a laser facet. This scheme is demonstrated for the first time by a novel micromechanical laser consisting of an InGaAsP/InP multisegment laser with a monolithic moving micro-mirror driven by an electrostatic comb structure. The main advantage of this laser is the capability of generating high-quality mode-locked pulses stabilized by a phase-locked loop (PLL) with low residual phase noise in a wide repetition-rate tuning range. This paper describes the basic concept and tuning performances utilizing the micromechanical passively mode-locked laser in 22-GHz fundamental mode-locking and in its second-harmonic mode-locking.