Information-centric networking (ICN) is a promising architecture and has attracted much attention in the area of future Internet architectures. As one of the key technologies in ICN, in-network caching can enhance content retrieval at a global scale without requiring any special infrastructure. In this paper, we propose a workload-aware caching policy, LRU-GT, which allows cache nodes to protect newly cached contents for a period of time (guard time) during which contents are protected from being replaced. LRU-GT can utilize the temporal locality and distinguish contents of different popularity, which are both the characteristics of the workload. Cache replacement is modeled as a semi-Markov process under the Independent Reference Model (IRM) assumption and a theoretical analysis proves that popular contents have longer sojourn time in the cache compared with unpopular ones in LRU-GT and the value of guard time can affect the cache hit ratio. We also propose a dynamic guard time adjustment algorithm to optimize the performance. Simulation results show that LRU-GT can reduce the average hops to get contents and improve cache hit ratio.

As a promising future network architecture, Information-centric networking (ICN) has attracted much attention, its ubiquitous in-network caching is one of the key technologies to optimize the dissemination of information. However, considering the diversity of contents and the limitation of cache resources in the Internet, it is usually difficult to find a one-fit-all caching strategy. How to manage the ubiquitous in-network cache in ICN has become an important problem. In this paper, we explore ways to improve cache performance from the three perspectives of spatiality, temporality and availability, based on which we further propose an in-network cache management strategy to support differentiated service. We divide contents requested in the network into different levels and the selection of caching strategies depends on the content level. Furthermore, the corresponding models of utilizing cache resources in spatiality, temporality and availability are also derived for comparison and analysis. Simulation verifies that our differentiated service based cache management strategy can optimize the utilization of cache resources and get higher overall cache performance.

Multi-antenna relay transport protocols are analysed, the transmitting matrix of relay node can split into a forward and a backward filters, and these two filters are cascade connection. Based on the zero-forcing relaying protocol, a spatial channel mapping matrix is added between these two filters, and a unified framework of spatial channel mapping matrix is proposed. Then, various linear system designs are summarized, the spatial channel mapping matrix is used to reduce destination noise, so that the relaying noise is suppressed in destination node, and the transmitting power of relay is efficiently utilized. Meanwhile, source node preprocessing operation and destination node equalizer are considered. Simulation results show that the spatial channel mapping matrix has an advantage in terms of system outage probability and capacity performance, and the result is consistent with theoretical analysis.

This letter investigates the performance of amplify-and-forward relaying systems using maximum ratio transmission at the source. A closed-form expression for the outage probability and a closed-form lower bound for the average bit error probability of the system are derived. Also, the approximate expressions for the outage probability and average bit error probability in the high signal-to-noise ratio regime are given, based on which the optimal power allocation strategies to minimize the outage probability and average bit error probability are developed. Furthermore, numerical results illustrate that optimizing the allocation of power can improve the system performance, especially in the high signal-to-noise ratio regime.

High-performance Network Over Coax, or HINOC for short, is a broadband access technology that can achieve bidirectional transmission for high-speed Internet service through a coaxial medium. In HINOC access networks, buffer management scheme can improve the fairness of buffer usage among different output ports and the overall loss performance. To provide different services to multiple priority classes while reducing the overall packet loss rate and ensuring fairness among the output ports, this study proposes a QoS optimization method for access networks. A backpressure-based queue threshold control scheme is used to minimize the weighted average packet loss rate among multiple priorities. A theoretical analysis is performed to examine the performance of the proposed scheme, and optimal system parameters are provided. Software simulation shows that the proposed method can improve the average packet loss rate by about 20% to 40% compared with existing buffer management schemes. Besides, FPGA evaluation reveals that the proposed method can be implemented in practical hardware and performs well in access networks.

Antenna selection is a practical way to decrease system complexity and the hardware cost of radio frequency (RF) chains in multiple input multiple output (MIMO) system. In this study, we give a simple characterization of the optimal diversity and multiplexing tradeoff (DMT) curve of the MIMO system with antenna subset selection at both the transmitter and the receiver for Rayleigh fading channel.

In this paper, we consider an amplify-and-forward (AF) relay network where a source node transmits information to a destination node through the cooperation of multiple relay nodes. It is shown in prior works that the outage behavior and average throughput of the selection AF (S-AF) scheme where only the best relay node is chosen to assist can outperform the conventional all-participate AF (AP-AF) scheme. Assuming multiple antennas at the destination node and single antennas at other nodes in this paper, we propose a relay selection scheme according to the criterion of maximizing receive signal to noise ratio (SNR), where a group of relays is chosen to assist in the transmission simultaneously in a manner similar to cyclic delay diversity (CDD). Compared with S-AF, the proposed scheme achieves better outage behavior and average throughput. It can be seen from simulation results that the performance improvement of symbol error rate (SER) is significant compared with S-AF.

For suppressing inter symbol interference, the support vector machine mutliuser detector (SVM-MUD) was adopted as a nonlinear method in direct sequence code division multiple access (DS-CDMA) signals transmitted through multipath channels. To solve the problems of the complexity of SVM-MUD model and the number of support vectors, based on recursive least squares support vector machine (RLS-SVM) and Riemannian geometry, a new algorithm for nonlinear multiuser detector is proposed. The algorithm introduces the forgetting factor to get the support vectors at the first training samples, then, uses Riemannian geometry to train the support vectors again and gets less improved support vectors. Simulation results illustrated that the algorithm simplifies SVM-MUD model at the cost of only a little more bit error rate and decreases the computational complexity. At the same time, the algorithm has an excellent effect on suppressing multipath interference.

In this letter, a new joint precoding and decoding design scheme for multiuser MIMO downlink is proposed which dispenses with iterative operations and can achieve better performance. This scheme introduces zero-force processing into minimum mean square error (MMSE) design scheme to avoid iterative operations. We derived closed-form precoders and decoders and transmit power allocation strategy of proposed design scheme, validated performance of proposed design scheme by computer simulation. The simulation results show that the proposed design scheme can achieve better bit error rate (BER) and sum capacity performance compared to an existing non-iterative design scheme.

Memory-efficient Internet Protocol (IP) lookup with high speed is essential to achieve link-speed packet forwarding in IP routers. The rapid growth of Internet traffic and the development of optical link technologies have made IP lookup a major performance bottleneck in core routers. In this paper, we propose a new IP route lookup architecture based on hardware called Prefix-Route Trie (PR-Trie), which supports both IPv4 and IPv6 addresses. In PR-Trie, we develop a novel structure called Overlapping Hybrid Trie (OHT) to perform fast longest-prefix-matching (LPM) based on Multibit-Trie (MT), and a hash-based level matching query used to achieve only one off-chip memory access per lookup. In addition, the proposed PR-Trie also supports fast incremental updates. Since the memory complexity in MT-based IP lookup schemes depends on the level-partitioning solution and the data structure used, we develop an optimization algorithm called Bitmap-based Prefix Partitioning Optimization (BP2O). The proposed BP2O is based on a heuristic search using Ant Colony Optimization (ACO) algorithms to optimize memory efficiency. Experimental results using real-life routing tables prove that our proposal has superior memory efficiency. Theoretical performance analyses show that PR-Trie outperforms the classical Trie-based IP lookup algorithms.

Automatic modulation recognition(AMR) of radar signals is a currently active area, especially in electronic reconnaissance, where systems need to quickly identify the intercepted signal and formulate corresponding interference measures on computationally limited platforms. However, previous methods generally have high computational complexity and considerable network parameters, making the system unable to detect the signal timely in resource-constrained environments. This letter firstly proposes an efficient modulation recognition network(EMRNet) with tiny and low latency models to match the requirements for mobile reconnaissance equipments. One-dimensional residual depthwise separable convolutions block(1D-RDSB) with an adaptive size of receptive fields is developed in EMRNet to replace the traditional convolution block. With 1D-RDSB, EMRNet achieves a high classification accuracy and dramatically reduces computation cost and network paraments. The experiment results show that EMRNet can achieve higher precision than existing 2D-CNN methods, while the computational cost and parament amount of EMRNet are reduced by about 13.93× and 80.88×, respectively.

Previously, convolutional neural networks have made tremendous progress in target recognition based on micro-Doppler radar. However, these studies only considered the presence of one target at a time in the surveillance area. Simultaneous multi-targets recognition for surveillance radar remains a pretty challenging issue. To alleviate this issue, this letter develops a multi-instance multi-label (MIML) learning strategy, which can automatically locate the crucial input patterns that trigger the labels. Benefitting from its powerful target-label relation discovery ability, the proposed framework can be trained with limited supervision. We emphasize that only echoes from single targets are involved in training data, avoiding the preparation and annotation of multi-targets echo in the training stage. To verify the validity of the proposed method, we model two representative ground moving targets, i.e., person and wheeled vehicles, and carry out numerous comparative experiments. The result demonstrates that the developed framework can simultaneously recognize multiple targets and is also robust to variation of the signal-to-noise ratio (SNR), the initial position of targets, and the difference in scattering coefficient.

In this study, we present a spherical style deformation algorithm to be applied on single component models that can deform the models with spherical style, while preserving the local details of the original models. Because 3D models have complex skeleton structures that consist of many components, the deformation around connections between each single component is complicated, especially preventing mesh self-intersections. To the best of our knowledge, there does not exist not only methods to achieve a spherical style in a 3D model consisting of multiple components but also methods suited to a single component. In this study, we focus on spherical style deformation of single component models. Accordingly, we propose a deformation method that transforms the input model with the spherical style, while preserving the local details of the input model. Specifically, we define an energy function that combines the as-rigid-as-possible (ARAP) method and spherical features. The spherical term is defined as l2-regularization on a linear feature; accordingly, the corresponding optimization can be solved efficiently. We also observed that the results of our deformation are dependent on the quality of the input mesh. For instance, when the input mesh consists of many obtuse triangles, the spherical style deformation method fails. To address this problem, we propose an optional deformation method based on convex hull proxy model as the complementary deformation method. Our proxy method constructs a proxy model of the input model and applies our deformation method to the proxy model to deform the input model by projection and interpolation. We have applied our proposed method to simple and complex shapes, compared our experimental results with the 3D geometric stylization method of normal-driven spherical shape analogies, and confirmed that our method successfully deforms models that are smooth, round, and curved. We also discuss the limitations and problems of our algorithm based on the experimental results.

The calculation of cross-correlation between a sequence with good autocorrelation and its decimated sequence is an interesting problem in the field of sequence design. In this letter, we consider a class of ternary sequences with perfect autocorrelation, proposed by Shedd and Sarwate (IEEE Trans. Inf. Theory, 1979, DOI: 10.1109/TIT.1979.1055998), which is generated based on the cross-correlation between m-sequence and its d-decimation sequence. We calculate the cross-correlation distribution between a certain pair of such ternary perfect sequences and show that the cross-correlation takes three different values.

A new data-aided carrier frequency offset (CFO) estimation technique is presented for correlative coded OFDM systems in the presence of strong multipath. Different from traditional data-aided estimation techniques, the technique estimates CFO by detecting amplitude of pilots rather than their phase shift and removes effects on CFO estimation due to intercarrier interference by an iterative compensation method. A theoretical analysis of its performance has been derived and simulation results comparing the new technique with a traditional data-aided estimation technique are presented.

Digital phase shifters are widely used to achieve space scanning in phased array antenna, and beam pointing accuracy depends on the bit number and resolution of the digital phase shifter. This paper proposes a novel phase feeding method to reduce the phase quantization error effects. A linear formula for the beam pointing deviation of a linear uniform array in condition of phase quantization error is derived, and the linear programming algorithm is introduced to achieve the minimum beam pointing deviation. Simulations are based on the pattern of the phased array, which gives each element a certain quantization phase error to find the beam pointing deviation. The novel method is then compared with previous methods. Examples show that a 32-element uniform linear array with 5-bit phase shifters using the proposed method can achieve a higher beam-steering accuracy than the same array with 11-bit phase shifters.

The last decade has witnessed an explosion of interest in research on human emotion modeling for generating intelligent virtual agents. This paper proposes a novel personality model based on the Revised NEO Personality Inventory (NEO PI-R). Compared to the popular Big-Five-Personality Factors (Big5) model, our proposed model is more capable than Big5 on describing a variety of personalities. Combining with emotion models it helps to produce more reasonable emotional reactions to external stimuli. A novel Resistant formulation is also proposed to effectively simulate the complicated negative emotions. Emotional reactions towards multiple stimuli are also effectively simulated with the proposed personality model.

This paper mainly proposes a line segment detection method based on pseudo peak suppression and local Hough transform, which has good noise resistance and can solve the problems of short line segment missing detection, false detection, and oversegmentation. In addition, in response to the phenomenon of uneven development in nuclear emulsion tomographic images, this paper proposes an image preprocessing process that uses the “Difference of Gaussian” method to reduce noise and then uses the standard deviation of the gray value of each pixel to bundle and unify the gray value of each pixel, which can robustly obtain the linear features in these images. The tests on the actual dataset of nuclear emulsion tomographic images and the public YorkUrban dataset show that the proposed method can effectively improve the accuracy of convolutional neural network or vision in transformer-based event classification for alpha-decay events in nuclear emulsion. In particular, the line segment detection method in the proposed method achieves optimal results in both accuracy and processing speed, which also has strong generalization ability in high quality natural images.

Leukemia is a common and highly dangerous blood disease that requires early detection and treatment. Currently, the diagnosis of leukemia types mainly relies on the pathologist’s morphological examination of blood cell images, which is a tedious and time-consuming process, and the diagnosis results are highly subjective and prone to misdiagnosis and missed diagnosis. This research suggests a blood cell image recognition technique based on an enhanced Vision Transformer to address these problems. Firstly, this paper incorporate convolutions with token embedding to replace the positional encoding which represent coarse spatial information. Then based on the Transformer’s self-attention mechanism, this paper proposes a sparse attention module that can select identifying regions in the image, further enhancing the model’s fine-grained feature expression capability. Finally, this paper uses a contrastive loss function to further increase the intra-class consistency and inter-class difference of classification features. According to experimental results, The model in this study has an identification accuracy of 92.49% on the Munich single-cell morphological dataset, which is an improvement of 1.41% over the baseline. And comparing with sota Swin transformer, this method still get greater performance. So our method has the potential to provide reference for clinical diagnosis by physicians.

Image segmentation is an essential processing step for many image analysis applications. In this paper, a novel image segmentation algorithm using fuzzy C-means clustering (FCM) with spatial constraints based on Markov random field (MRF) via Bayesian theory is proposed. Due to disregard of spatial constraint information, the FCM algorithm fails to segment images corrupted by noise. In order to improve the robustness of FCM to noise, a powerful model for the membership functions that incorporates local correlation is given by MRF defined through a Gibbs function. Then spatial information is incorporated into the FCM by Bayesian theory. Therefore, the proposed algorithm has both the advantages of the FCM and MRF, and is robust to noise. Experimental results on the synthetic and real-world images are given to demonstrate the robustness and validity of the proposed algorithm.