In order to prevent the degradation of TCP performance while traversing two WLANs, we present an implementation design of an inter-domain TCP handover method based on cross-layer and multi-homing. The proposed handover manager (HM) in the transport layer uses two TCP connections previously established via two WLANs (multi-homing) and switches the communication path between the two connections according to the handover trigger and the comparison of new/old APs. The handover trigger and comparison are conducted by assessing the wireless link quality using the frame-retry information obtained from the MAC layer (cross-layer). In a previous study, we proposed a preliminary concept for this method and evaluated its functional effectiveness through simulations. In the present study, we design an implementation considering a real system and then examine the effective performance in a real environment because a real system has several system constraints and suffers from fluctuations in an actual wireless environment. Indeed, depending on the cross-layer design, the implementation often degrades the system performance even if the method exhibits good functional performance. Moreover, the simple assessments of wireless link quality in the previous study indicated unnecessary handovers and inappropriate AP selection in a real environment. Therefore, we herein propose a new architecture that performs cross-layer collaboration between the MAC layer and the transport layer while avoiding degradation of system performance. In addition, we use a new assessment scheme of wireless link quality, i.e., double thresholds of frame retry and comparison of frame retry ratio, in order to prevent handover oscillation caused by fluctuations in the wireless environment. The experimental results demonstrate that the prototype system works well by controlling two TCP connections based on assessments of wireless link quality thereby achieving efficient inter-domain TCP handover in a real WLAN environment.

In IoT era, the growth of data variety is driven by cross-domain data fusion. In this paper, we advocate that “local production for local consumption (LPLC) paradigm” can be an innovative approach in cross-domain data fusion, and propose a new framework, geolocation-centric information platform (GCIP) that can produce and deliver diverse spatio-temporal content (STC). In the GCIP, (1) infrastructure-based geographic hierarchy edge network and (2) adhoc-based STC retention system are interplayed to provide both of geolocation-awareness and resiliency. Then, we discussed the concepts and the technical challenges of the GCIP. Finally, we implemented a proof-of-concepts of GCIP and demonstrated its efficacy through practical experiments on campus IPv6 network and simulation experiments.

Cross-domain data fusion is becoming a key driver in the growth of numerous and diverse applications in the Internet of Things (IoT) era. We have proposed the concept of a new information platform, Geo-Centric Information Platform (GCIP), that enables IoT data fusion based on geolocation, i.e., produces spatio-temporal content (STC), and then provides the STC to users. In this environment, users cannot know in advance “when,” “where,” or “what type” of STC is being generated because the type and timing of STC generation vary dynamically with the diversity of IoT data generated in each geographical area. This makes it difficult to directly search for a specific STC requested by the user using the content identifier (domain name of URI or content name). To solve this problem, a new content discovery method that does not directly specify content identifiers is needed while taking into account (1) spatial and (2) temporal constraints. In our previous study, we proposed a content discovery method that considers only spatial constraints and did not consider temporal constraints. This paper proposes a new content discovery method that matches user requests with content metadata (topic) characteristics while taking into account spatial and temporal constraints. Simulation results show that the proposed method successfully discovers appropriate STC in response to a user request.

Applying Software Defined Network (SDN) technology to wireless networks are attracting much attention. Our previous study proposed a channel utilization method based on SDN/OpenFlow technology to improve the channel utilization efficiency of the multi-channel wireless backhaul network (WBN). However, since control messages are inherently transmitted with data traffic on a same channel in WBN, it inevitably degrades the network capacity. Specifically, the amount of control messages for collecting statistical information of each flow (FlowStats) linearly increases with the number of ongoing flows, thereby being the dominant overhead for backhaul networks. In this paper, we propose a new method that prevents the increase of control traffic while retaining the network performance of the previous method. Our proposed method uses statistical information of each interface (PortStats) instead of per-flow information (FlowStats), and handles multiple flows on the interface together if possible. Otherwise, to handle individual flow, we propose a way to estimate per-flow information without introducing extra control messages. Finally, we show that the proposed method offers the same performance with the previous method, while greatly reducing the amount of control traffic.

In the near future, wireless local area networks (WLANs) will overlap to provide continuous coverage over a wide area. In such ubiquitous WLANs, a mobile node (MN) moving freely between multiple access points (APs) requires not only permanent access to the Internet but also continuous communication quality during handover. In order to satisfy these requirements, an MN needs to (1) select an AP with better performance and (2) execute a handover seamlessly. To satisfy requirement (2), we proposed a seamless handover method in a previous study. Moreover, in order to achieve (1), the Received Signal Strength Indicator (RSSI) is usually employed to measure wireless link quality in a WLAN system. However, in a real environment, especially if APs are densely situated, it is difficult to always select an AP with better performance based on only the RSSI. This is because the RSSI alone cannot detect the degradation of communication quality due to radio interference. Moreover, it is important that AP selection is completed only on an MN, because we can assume that, in ubiquitous WLANs, various organizations or operators will manage APs. Hence, we cannot modify the APs for AP selection. To overcome these difficulties, in the present paper, we propose and implement a proactive AP selection method considering wireless link condition based on the number of frame retransmissions in addition to the RSSI. In the evaluation, we show that the proposed AP selection method can appropriately select an AP with good wireless link quality, i.e., high RSSI and low radio interference.