This paper proposes a hybrid access control scheme for broadcast-based ATM-LANs. Broadcast-based ATM-LANs are shared media networks with star topology. In this network, packets are broadcast to all subscriber terminals by a CPYF (Cell COPY Function) node located in the ATM network and only relevant packets are extracted and sent to the destined user layer function by packet filtering functions in the terminals. The simplicity of the packet transfer mechanism makes the network very economical. In broadcast-based ATM-LANs, the hybrid access control scheme is effective in improving performance. In this scheme, short packets and long packets are transmitted respectively by means of a back-pressure type and a CSMA/CD type access control scheme. Throughput evaluation was performed by computer simulation and the results show that the proposed scheme achieves a high throughput characteristic.

This paper discusses and evaluate a high speed multimedia communications in ATM networks. Communication platforms below AAL layer in ATM networks can provide fairly high speed communication channel for ATM-UNI. On the other hand, the conventional data processing architecture in the workstations can not provide sufficient throughput compared to the throughput of ATM networks at this time. Also, regarding error-free peer-to-peer data communications, conventional transport protocol, e.g. TCP, can not provide small latent communication, when the product of communication bandwidth and propagation delay is large. This paper focuses on protocol architecture, especially on error control policy at SSCS in AAL layer, and on performance evaluation of high speed multimedia communication based on the current data processing architecture.

This paper proposes a datagram delivery (class D service) architecture in an ATM-Internet, which is the network interconnecting ATM-LANs through the IWUs, Inter-Working Unit. We can provide a fast datagram delivery system through the following techniques. The datagram delivery to the destination terminal is performed by the datagram delivery server, so called CLS, which is located in the ATM-LAN where the destination terminal belongs to. Each CLS only manages the addresses for the terminals belonging to the corresponding ATM-LAN. The cells belonging to a certain datagram are transferred through a single (seamless) ATM connection from the source terminal to the CLS in the ATM-LAN where the destination terminal belongs to. The source terminal only resolves the access point address corresponding to the ATM-LAN where the destination terminal belongs to, when it submits the cells to the network to transfer the datagram to the corresponding destination terminal. The proposed datagram delivery architecture can be applied to the ATM-LAN system based on VPI routing architecture, easily. The number of the required ATM connections so as to provide datagram delivery through the proposed architecture is less than 1.0% of the ATM connections that the ATM-Internet can provide. Also, the required address space at UNI to provide datagram delivery are less than 1.0% of the UNI address space which is available to be used as an ATM connection identifier.

This paper discusses a way of identifying the network configuration of ATM-LANs, which are composed of a number of ATM hubs. In general, a Network Management System (NMS) sets and gets the necessary data to and from the network elements. In managing an ATM-LAN, the ATM connection between the NMS and each network element, namely the ATM hub, must be established in order to get and set the necessary data. This forms a remarkable contrast with conventional LANs such as the IEEE802.3 LAN, which is a shared media network and enables broadcast communication without setting up any connection. This paper proposes a new protocol and a procedure that establishes the ATM connection between the NMS and each ATM hub, while identifying the overall network configuration. First, this paper makes clear the peculiarity of the ATM-LAN in terms of automatically identifying the network configuration. Next, the identification protocol that achieves the required properties is precisely explained. Then, the proposed identification protocol is evaluated in terms of required bandwidth and identification time.