This paper presents a novel time-domain design procedure for fast-settling three-stage nested-Miller compensated (NMC) amplifiers. In the proposed design methodology, the amplifier is designed to settle within a definite time period with a given settling accuracy by optimizing both the power consumption and silicon die area. Detailed design equations are presented and the circuit level simulation results are provided to verify the usefulness of the proposed design procedure with respect to the previously reported design schemes.

MOSFETs can be used as capacitors, but its capacitance can vary by 5 to 7 times as its terminal voltage varies. To reduce the voltage dependence of the capacitance, this paper proposed two types of devices: one is called accumulation MOSFET (AMOS) and the other is formed by two conventional PMOS connected in anti-parallel. These two devices are readily available in the standard digital CMOS processes. The proposed capacitors were implemented in three different CMOS processes. The measured results show that the capacitances of both devices have less voltage dependence than a single PMOS. The voltage dependence of the AMOS capacitance can be as small as 17%. The minimum capacitance per unit area of the AMOS is 1.8 times that of the double-poly capacitor in an analog/mixed-mode CMOS process. To verify the usefulness of these two types of capacitors, they are used as compensation capacitors in a conventional two-stage amplifier. The measured results show that the amplifier compensated by the AMOS capacitor has little variation (6%) of the unity-gain frequency over the input common-mode range. Due to its smaller die area and cheaper digital process, AMOS can be used as compensation capacitor without resorting to more expensive analog process.