We numerically investigated the optical output characteristics in two kinds of optical waveguide coupled high-index-contrast subwavelength grating VCSELs (HCG-VCSELs) that couple the laser output to the in-plane waveguide, operating at a 1.55-µm region. One is the transverse electric (TE) HCG, and the other is the transverse magnetic (TM) HCG. In a waveguide coupled HCG without a cavity structure, the out-coupling efficiency to the waveguide strongly depends on the intensity of the incident light at the starting edge of the waveguide. In a waveguide coupled HCG-VCSEL, the ratio of the waveguide output to the optical power inside the active region is determined also by the intensity of the resonant mode at the waveguide edge. The TE-HCG-VCSEL exhibited an almost 30 times larger waveguide output power while the quality factor of the laser cavity is 1/3, compared to those in the TM-HCG-VCSEL. The single mode condition was satisfied for the waveguide of the TE-HCG-VCSEL while the first order mode was allowed for that of the TM-HCG-VCSEL. Positioning the mesa edge at the waveguide edge within 1-µm accuracy results in waveguide outputs of about 0.7 and 0.02% of that inside the active region for TE- and TM-HCG-VCSEL, respectively.

The fabricated 1.55 µm high power superluminescent light emitting diodes (SLEDs) with 115 mW maximum output power and 3 dB bandwidth of 50 nm, using active multi-mode interferometer (MMI), showed high coupling efficiency of 66% into single-mode fiber, which resulted in maximum fiber-coupled power of 77 mW.

We apply newly developed rigorous modal transmission-line theory (MTLT) to evaluate optimal design conditions on optical power coupling in grating-assisted directional couplers (GADCs) with two or three guiding channels. By defining a power distribution ratio (PDR) and coupling efficiency (CE) amenable to the rigorous analytical solutions of MTLT, we explicitly analyze the power coupling characteristics of TE modes propagating in GADCs. The numerical results reveal that the incident power is optimally coupled into the desired guiding channel if the powers of rigorous modes excited at the input boundary of grating-assisted coupler are equally partitioned.

In this paper, scattering problem of the directional coupler for the slab waveguides are analyzed by the mode-matching method in the sense of least squares for the lowest order even TE mode incidence. It is considered that the analysis of this coupler for the slab waveguides presents the fundamental data to design the directional coupler for the three dimensional waveguides. This directional coupler is composed of three parallel slabs which are placed at equal space in the dielectric medium. Respective slabs are core regions of three respective waveguides. The periodic groove structure of finite extent is formed on the both surfaces of core region of the central waveguide among them. The power of incident TE mode is coupled to other two waveguides through periodic groove structure. The coupled TE mode propagates in the other waveguides to the same or opposite direction for the direction of incident mode which propagates in the waveguide having periodic structure when the Bragg condition is selected appropriately. The scattered field of each region of this directional coupler is described by the superpositions of the plane waves with bandlimited spectra, respectively. These approximate wave functions are determined by the minimization of the mean-square boundary residual. This method results in the simultaneous Fredholm type integral equations of the second kind for these spectra. The first order approximate solutions of the integral equations are derived and the coupling efficiency and scattered fields are analyzed on the basis of those solutions in this paper.

This paper presents the performance of a proposed GaAs MESFET photodetector with wide drain-to-gate distances for improving the optical coupling efficiency in subcarrier optical transmission. Principle and design parameters of the proposed MESFET are described. Link gain, CNR, and BER, are experimentally investigated as functions of the drain-to-gate distance. It is experimentally found that the proposed MESFET improves the link gain by 8.5 dB compared to the conventional structure at the subcarrier frequency of 140 MHz. Discussions are also included compared to PIN-PD.

In this paper, scattering problem of the grating coupler is analyzed by the mode-matching method in the sense of least squares for the gaussian light beam incidence. This coupler has a periodic groove structure of finite extent, which is formed on the surface of the core layer of the symmetric thin-film waveguide. In the present method, the approximate scattered fields of each region of the grating coupler are described by the superpositions of the plane waves with band-limited spectra, respectively. These approximate wave functions are determined by the minimization of the mean-square boundary residual. This method results in the simultaneous Fredholm type integral equations of the second kind for these spectra. The first and second order approximate solutions of the integral equations are derived analytically and the coupling efficiency and scattered fields are analyzed on the basis of those solutions. A qualitative and physical consideration for the scattering problem of the grating coupler is presented with the fundamental data derived from approximate solutions in this paper.