In this paper, a three-way divider is proposed for a partially-corporate feed in an alternating phase-fed single-layer slotted waveguide array. The divider is placed at the middle of the feed waveguide and reduces the long line effects; the frequency bandwidth is doubled. It is a kind of cross junction with one input port and three output ports; most of the power is equally divided into the right and left halves of the feed waveguide while the rest of power goes straight into the center radiating waveguide. Based upon the moment method design of the three-way divider, an inductive post is introduced for wide band power dividing control to the radiating waveguide. Reflection is below -20 dB over a wide bandwidth of 24.3-26.3 GHz, and the range of power dividing ratio ranges from 1/43 to 1/4. The amplitude and the phase from the two output ports to the feed waveguide are well balanced, and the differences are less than 0.1 dB and 5.0 degrees, respectively. The MoM analysis and the wide band design are verified experimentally in the 4 GHz band.

The authors propose a novel 3-way power divider named a planar cross-junction, which is used as the center feed for single-layer slotted waveguide arrays. A feeding waveguide consisting of a cascade connection of these dividers is placed at the middle of radiating waveguide in a single layer. The length of radiating waveguides is halved; the long line effect in traveling wave operation is halved and bandwidth is widened. One divider as a unit is designed by Galerkin's method of moments to suppress the reflection and to control the amplitude and the phase of the divided power into two radiating waveguides on both sides of a feed one. Two types of the cross-junction with a different divided power ratio are designed and tested by experiments in 4 GHz band. The mutual coupling effects between two adjacent cross-junctions as cascaded in a feeding waveguide of the array are predicted to be small enough; units designed here are directly applicable for a multiple-way power divider.