In inter-data center networks where high transmission capacity and spectral efficiency are required, a 16QAM format is deployed. On the other hand, in intra-data center networks, a PAM4 format is deployed to meet the demand for a simple and low-cost transceiver configuration. For a seamless and effective connection of such heterogeneous networks without using optical-electrical-optical conversion, an all-optical modulation format conversion technique is required. In this paper, we propose an all-optical PAM4 to 16QAM modulation format conversion using nonlinear optical loop mirror. The successful conversion operation from 2 × 26.6-Gbaud PAM4 signals to a 100-Gbps class 16QAM signal is verified by numerical simulation. Compared with an ideal 16QAM signal, the power penalty of the converted 16QAM signal can be kept within 0.51dB.

We experimentally demonstrate the ultrafast and high-repetition capabilities of a polarization-discriminating symmetric Mach-Zehnder (PD-SMZ) all-optical switch. This switch, as well as an original symmetric Mach-Zehnder (SMZ) all-optical switch, is based on a highly efficient but slowly relaxing band-filling effect that is resonantly excited in a passive InGaAsP bulk waveguide. By using a mechanism that cancels out the effect of the slow relaxation, ultrafast switching is attained. We achieve a switching time of 200 fs and demultiplexing of 1.5 Tbps, showing the applicability of the SMZ or PD-SMZ all-optical switches to optical demultiplexing of well over 1 Tbps for the first time. High-repetition capability, which is another important issue apart from the switching speed, is also verified by using control pulses at a repetition rate of 10.5 GHz. We also discuss the use of nonlinearity in a semiconductor optical amplifier to further reduce the control-pulse energy.

We experimentally demonstrate the ultrafast and high-repetition capabilities of a polarization-discriminating symmetric Mach-Zehnder (PD-SMZ) all-optical switch. This switch, as well as an original symmetric Mach-Zehnder (SMZ) all-optical switch, is based on a highly efficient but slowly relaxing band-filling effect that is resonantly excited in a passive InGaAsP bulk waveguide. By using a mechanism that cancels out the effect of the slow relaxation, ultrafast switching is attained. We achieve a switching time of 200 fs and demultiplexing of 1.5 Tbps, showing the applicability of the SMZ or PD-SMZ all-optical switches to optical demultiplexing of well over 1 Tbps for the first time. High-repetition capability, which is another important issue apart from the switching speed, is also verified by using control pulses at a repetition rate of 10.5 GHz. We also discuss the use of nonlinearity in a semiconductor optical amplifier to further reduce the control-pulse energy.

The novel application potential of mode-locked laser diodes (MLLDs) in ultrafast optical signal processing in addition to coherent optical pulse generation is described. As the most fundamental function of MLLDs, we show that the generation of ultrashort (2 ps) coherent optical pulses with low timing jitter (<0. 5 ps) at precisely controlled wavelength and repetition frequency can be achieved by employing a rigid module configuration for an external-cavity MLLD. We then discuss new aspects of MLLDs which are functions of ultrafast all-optical signal processing such as optical clock extraction and optical gating. All-optical clock extraction is based on the timing synchronization of MLLD output to the injected optical data pulse. When the passive mode-locking frequency of an MLLD is very close to the fundamental clock pulse frequency of optical data, the former frequency is pulled into the latter frequency by optical data injection. We show that same-frequency and subharmonic-frequency optical clock pulses can successfully be extracted from optical data pulses at bit rates of up to 80 Gbit/s with very simple configurations and very low excess timing jitter (<0. 1 ps). On the other hand, optical gating is due to absorption saturation and the following picosecond absorption recovery in a saturable absorber (SA) in an MLLD structure incorporating optical gate-pulse amplification. Here, MLLDs are anti-reflection coated and used as traveling wave devices instead of laser oscillators, and small saturation energy (<1 pJ) and ultrafast recovery time (<8 ps) are demonstrated. By combining all these MLLD functions, we successfully demonstrated an experiment with 40- to 10-Gbit/s all-optical demultiplexing processing.