Recently, overlap frequency-domain equalization (FDE) based on minimum mean square error (MMSE) criterion which requires no guard interval (GI) insertion was proposed for signal transmission using multi-code direct sequence code division multiple access (DS-CDMA) in a frequency-selective fading channel. Another promising equalization technique is time-domain sliding-window chip equalization (SWCE). In this paper, the bit error rate (BER) performances achievable with overlap FDE and SWCE are compared. It is shown that, by extending the fast Fourier transform (FFT) block size, overlap FDE can achieve almost the same BER performance as SWCE with much less computational complexity than SWCE.

Recently, a new frequency-domain equalization (FDE) technique, called overlap FDE, that requires no GI insertion was proposed. However, the residual inter/intra-block interference (IBI) cannot completely be removed. In addition to this, for multicode direct sequence code division multiple access (DS-CDMA), the presence of residual inter-chip interference (ICI) after FDE distorts orthogonality among the spreading codes. In this paper, we propose an iterative overlap FDE for multicode DS-CDMA to suppress both the residual IBI and the residual ICI. In the iterative overlap FDE, joint minimum mean square error (MMSE)-FDE and ICI cancellation is repeated a sufficient number of times. The bit error rate (BER) performance with the iterative overlap FDE is evaluated by computer simulation.

Recently, multi-carrier code division multiple access (MC-CDMA) has been attracting much attention as a broadband wireless access technique for the next generation mobile communication systems. Frequency-domain equalization (FDE) based on the minimum mean square error (MMSE) criterion can take advantage of the channel frequency-selectivity and improve the average bit error rate (BER) performance due to frequency-diversity gain. The conventional FDE requires the insertion of the guard interval (GI) to avoid the inter-block interference (IBI), resulting in the transmission efficiency loss. In this paper, an overlap FDE technique, which requires no GI insertion, is presented for MC-CDMA transmission. An expression for the conditional BER is derived for the given set of channel gains. The average BER performance in a frequency-selective Rayleigh fading channel is evaluated by Monte-Carlo numerical computation method using the derived conditional BER and is confirmed by computer simulation of the signal transmission.

Turbo coded hybrid ARQ (HARQ) is known as one of the promising error control techniques for high speed wireless packet access. However, in a severe frequency-selective fading channel, the HARQ throughput performance significantly degrades for direct sequence code division multiple access (DS-CDMA) system using rake combining. This problem can be overcome by replacing the rake combining by the frequency-domain equalization (FDE) based on minimum mean square error (MMSE) criterion. In a system with the conventional FDE, the guard interval (GI) is inserted to avoid the inter-block interference (IBI). The insertion of GI reduces the throughput. Recently, overlap FDE that requires no GI insertion was proposed. In this paper, we apply overlap FDE to HARQ and derive the MMSE-FDE weight for packet combining. Then, we evaluate the throughput performance of DS-CDMA HARQ with overlap FDE. We show that overlap FDE provides better throughput performance than both the rake combining and conventional FDE regardless of the degree of the channel frequency-selectivity.