This letter presents the field uniformity characteristics of a triangular prism reverberation chamber. A reverberation chamber that generally uses a stirrer to create a uniform electric field inside is an alternative to the semi-anechoic chamber for an electromagnetic compatibility test. To overcome the size and maintenance problems of a stirrer, we propose to replace it with a Quadratic Residue Diffuser which is commonly used in acoustics. To confirm that the diffuser is a valid alternative to the stirrer, a diffuser and an equilateral triangular prism reverberation chamber are designed and fabricated for 2.3-3.0 GHz operation. To investigate the field uniformity characteristics by varying the location of the transmitting antenna, both simulation and measurement in the triangular prism reverberation chamber were also done at its two positions, respectively. A commercial program XFDTD 6.2, engaging the finite difference time domain (FDTD), is used for simulation and a cumulative probability distribution, which the IEC 61000-4-21 recommends, is used to evaluate the field uniformity. Both simulation and measurement results show that the field uniformity in the chamber satisfies the international standard requirement of 6 dB tolerance and 3dB standard deviation, which means that a diffuser can be substituted for a stirrer.

This paper presents the field uniformity characteristics in a triangular prism reverberation chamber that can be substituted for an open area test site or an anechoic chamber to measure electromagnetic interference. To improve size problems of a stirrer that is an official unit to generate a uniform field in the reverberation chamber, we suggest a diffuser of Quadratic Residue Sequence method. To validate the substitution of a diffuser for a stirrer, a diffuser is designed for 1-3 GHz, and three types of equilateral triangular prism reverberation chambers are modeled. Afterwards, the field distributions in these three reverberation chambers are both simulated and tested. Using XFDTD 6.2 of finite difference time domain method, field deviations of each structure are simulated and compared to each other. An evaluation of field uniformity is done by cumulative probability distribution which is specified in the IEC 61000-4-21. The result shows that the field uniformity in the chamber is within 6 dB tolerance and also within 3 dB standard deviation, which means a diffuser can satisfy the requirement of international standards.