Physical limitation of the conventional longitudinal media has been actualized recent days according to the dramatic increase in storage area density with a growth ratio of more than 100%/year so that perpendicular recording is being watched with keen interest. Development in perpendicular recording media from the proposal to actual usage for HDD system are reviewed in terms of historical back ground, recent media design and preparation, new media proposal and recording performances, mainly basing on the author's results. In case of perpendicular media, physical limit of thermal stability could not be so serious but media noise reduction with sophisticated preparation method has been research topics as the breakthrough for the commercialization. Improvements on Co-Cr system alloy media were made by introducing proper additives and under layers so that a high storage density over 60 Gb/inch2 has been achieved. Far higher density up to 1 Tera bits/ inch2 is expected to be possible by using newly proposed Co/Pd multilayer or Fe-Pt metal compound films. It is prospected that breakthrough for the future progresses would be mechanical issues such as head medium spacing and tribology problems rather than magnetic properties of media.

The medium noise of single-layer perpendicular recording media is known to be suppressed by reducing the magnetic domain size and achieving a higher squareness ratio (Mr/Ms = SQ) in the perpendicular M-H loop. The media with smaller domain sizes exhibit a small slope at Hc in the M-H loop due to exchange de-coupling between adjacent grains, which requires a sharp head field to acquire high recording performances. Reduction of the medium thickness would be effective for recording as only a sharp head field near the head surface could be used. Thus, the effects of reduced recording layer thickness in single-layer perpendicular recording media on read/write performances were investigated using Co/Pd multilayer media with a small loop slope having thickness, δ, of 46, 22 and 10 nm, and with a steeper loop slope having δ of 40 and 10 nm. It was found that the recording performance on small loop slope media could be improved in terms of signal level by reducing the recording layer thickness, which indicated that the recording on the media was sensitive to the recording head field. The results in the simulation analysis were similar to those obtained experimentally, indicating that the change in recording layer thickness could be mainly regarded as that in the head-medium spacing. Thinner media with steeper loop slopes could acquire a narrower dipulse width. The recording resolution of the present media, however, was determined under the influence of the domain structure and the size. Finally, for media with small loop slopes, the same SNR of 38 dB at 100 kFRPI was obtained for thicknesses of 22 and 10 nm, which was larger than that for a thick medium of 46 nm thickness by 8 dB. For both the steep loop slope media, the obtained SNR was 35 dB at 100 kFRPI.

As technology moves at an annual area density increase rate of 80-120% and channel density moves beyond 3, micro-fluctuation of media recording performance and the homogeneity of media's recording capability become serious reliability concerns in future high density magnetic recording systems. Two concepts are proposed in this work for the characterization of the micro-recording performance fluctuation at high bit and channel densities: recording performance roughness analysis and dynamic magnetic roughness analysis. The recording performance roughness analysis is based on an in-situ measurement technique of the non-linear transition shift (NLTS). Relationship between the performance roughness and the roughness of dynamic magnetic parameters are studied. Results of experimental investigations indicate that the NLTS based performance roughness analysis can reveal more details on media's recording capability and the capability fluctuation--the macro and micro fluctuation of recording performance. The dynamic magnetic roughness analysis is read/write operation based and can be used to characterize the macro and micro fluctuation of media's dynamic magnetic properties. The parameters used for the analysis include media's dynamic coercivity and the dynamic coercive squareness. Here, "dynamic" refers to the dynamic performance measured at MHz frequency. The authors also noticed in their technology development process that further methodology development and confirmation are necessary for media's dynamic performance analysis. Therefore, the work also extends to the accuracy analysis of the playback amplitude based methods for the analysis of the dynamic coercive squareness and dynamic hysteresis loop. A method which is of smaller testing error is identified and reported in this work.

Ring head recording on single-layer perpendicular recording media was studied by a simple simulation analysis based on a loop tracing method considering only the perpendicular component. Although the assumed model was primitive, the simulation results qualitatively well explained the experimental results such as a decrease in output at high recording currents and its relaxation upon using a smaller gap-length head. The simulation results revealed that achievable recorded magnetization is, in general, much smaller than the saturation value due to a broad distribution of the ring head field, but a medium with a steeper slope in the perpendicular M-H loop could improve the recording performance. This was confirmed experimentally for the medium with a steeper loop slope, though the medium exhibited a larger medium noise at high densities. It was suggested that the development of perpendicular recording for higher output and lower noise could be performed for both media with a small and steep loop slope. The former should be improved by means of the recording head while the latter by the media. A large improvement is expected for both cases.