In conventional road-vehicle communication systems, user terminals in the vehicles have to directly connect to wireless access points (APs). However, vehicle speeds are so fast that the channel condition between the terminals and the APs constantly changes because of changing path loss and time-varying fading. In this paper, to compensate for such deterioration, we propose to reduce the relative speed between the terminals and the APs by an inter-vehicle packet relay technique. If a terminal can send data via other vehicles running at lower speeds, the relative speed will decrease, which suppresses the dynamic range of path loss and deterioration by fading. We, first, validate our method by a numerical analysis using a statistical path-loss model. The numerical analysis verifies that our method is able to suppress deterioration caused by path loss and time-varying fading. However, in the numerical analysis, geometric propagation of paths is not considered; instantaneous and rapid loss changes are not considered. Therefore, we evaluate our method by computer simulations using a geometric propagation model. In the simulations, phase difference between multiple paths and loss fluctuation within one frame duration affect the performance. From the results of the simulations, we validate our method. Furthermore, we investigate the combination of our method and the selection diversity technique, which can suppress channel fluctuation and may enhance the performance of our method. Moreover, we measure interference in the overlapped zone between two AP areas. From the measurement, we show that our packet relays do not cause a problem in interference between areas.

In road-vehicle communication systems, the transmission rate between user terminals in the vehicle and the access points degrades due to changing path-loss and time-varying fading. In this paper, we used an inter-vehicle packet relay technique to improve channel quality in road-vehicle communication systems. We evaluated this method using numerical analysis to validate our method.