Recently, major services provided by mobile communications systems are shifting from voice conversations to data communications over the Internet. There is a strong demand for increasing the data transmission rate. However, an important problem arises; larger peak transmit power is required as transmission rate becomes higher. In this paper, we propose a wireless multi-hop virtual cellular concept to avoid this power problem. The virtual cellular network consists of a central port, which is a gateway to the network, and many distributed wireless ports. Transmit power and frequency efficiencies of the virtual cellular network are evaluated by computer simulation to compare with that of the present cellular networks. In the wireless multi-hop virtual cellular network, routing among wireless ports is an important technical issue. We propose a routing algorithm based on the total uplink transmit power minimization criterion and evaluate the total transmit power by computer simulation.

Independent shadowing losses are often assumed for computing the frequency reuse distance of cellular mobile communication systems. However, shadowing losses may be partially correlated since the obstacles surrounding a mobile station block similarly the desired signal and interfering signals. We investigate, by computer simulation, how the shadowing correlation impacts the frequency reuse distance of a power controlled cellular system. It is pointed out that the shadowing correlation impacts the frequency reuse distance differently for the uplink and downlink.

Temporal locality in IP destination address sequences can be captured by the addresses' reuse distance distribution. Based on measurements from data for a wide range of networks, we propose an accurate empirical model in contrast to results derived from the stationarity assumption of address generation processes.

This paper analyzes the performance of the capacity controlled digital radio system, which controls the number of modulation levels according to the amount of traffic. These analyses are performed under thermal noise and co-channel interference. As a result, the throughput improvement is approximately 16 times comparing with the fixed capacity system which has the designed outage probability of 0.1%. Theoretical results are applied to the future mobile communication system which utilizes TDMA access method or burst co-dec, and it is found that the reuse distance can be improved to 1/5 times when the designed outage probability is 0.1%.