This paper focuses on the latest research of switching arc both in vacuum and SF6 substitutes in our group. The crucial characteristics of vacuum arc are illustrated, including the motion and distribution of single cathode spot and multiple cathode spots, the influence of axial magnetic field on arc plasma characteristics, the influence of composite magnetic field on cathode jets, and the study of anode activities. Meanwhile, the arc characteristics in SF6 and its substitutes (Ar, CO2 and N2) at different pressures and gap distances are investigated by experiments and simulation.

This paper presents a comprehensive explanation of the formation of the electric arc between opening contacts in a current carrying electric circuit. As the contacts begin to open a molten metal bridge forms between them. The rupture of this bridge and the initial formation of the electric arc are studied in both atmospheric air and vacuum using experiments to determine the direction of metal transfer between the contacts as a function of time after the rupture of the molten metal bridge. High speed streak photography is also used to show the rupture of the molten metal bridge and the initial formation of the electric arc. Analysis of these data show that a very high-pressure, high-temperature metal vapor zone exists between the contacts after the rupture of the molten metal bridge. Under this condition a pseudo-arc forms where current is carried by metal ions and an anomalous, high net transfer of metal to the cathodic contact occurs. The pressure in this region decreases rapidly and there is a transition to the usual electric arc, which still operates in the metal vapor. In this arc the current is now mostly carried by electrons. The data shows that there is still a net transfer of metal to the cathode, but now its volume is a function of the arcing time.

Anode activity in vacuum arc plays a very important role in both characteristics of vacuum arc and the interruption capacity of vacuum interrupters. In this paper, the transient thermal processes of anode in vacuum arc in a half of arc current cycle with frequency of 50 Hz are simulated by finite element analysis software, ANSYS. Some important phenomena of anode, e.g., the melt and solidification, mass loss due to evaporation, are investigated.

The vacuum arc root properties (temperature, current density, radius of an arc root, fraction of current density carried by electrons, evaporation rate etc.) of graphite and copper are calculated with the cathode-fall voltage as parameter and the arc root properties of graphite are compared with that of copper. Especially, there is big difference between the evaporation rate of graphite and that of copper. This reason is thought that the thermal conductivity of graphite is low and its evaporating temperature is high.