IEICE TRANSACTIONS on Communications
Variable Spreading Factor-OFCDM with Two Dimensional Spreading that Prioritizes Time Domain Spreading for Forward Link Broadband Wireless Access
Summary :
This paper proposes the optimum design for adaptively controlling the spreading factor in Orthogonal Frequency and Code Division Multiplexing (OFCDM) with two-dimensional spreading according to the cell configuration, channel load, and propagation channel conditions, assuming the adaptive modulation and channel coding (AMC) scheme employing QPSK and 16QAM data modulation. Furthermore, we propose a two-dimensional orthogonal channelization code assignment scheme to achieve skillfully orthogonal multiplexing of multiple physical channels. We first demonstrate the reduction effect of inter-code interference by the proposed two-dimensional orthogonal channelization code assignment. Then, computer simulation results show that in time domain spreading, the optimum spreading factor, except for an extremely high mobility case such as for the fading maximum Doppler frequency of fD = 1500 Hz, becomes SFTime = 16. Furthermore, it should be decreased to SFTime = 8 for such a very fast fading environment using 16QAM data modulation. We also clarify when the channel load is light such as Cmux/SF = 0.25 (Cmux and SF denote the number of multiplexed codes and total spreading factor, respectively), the required average received signal energy per symbol-to-noise power spectrum density ratio (Es/N0) is reduced as the spreading factor in the frequency domain is increased up to say SFFreq = 32 for QPSK and 16QAM data modulation. When the channel load is close to full such as when Cmux/SF = 0.94, the optimum spreading factor in the frequency domain is SFFreq = 1 for 16QAM data modulation and SFFreq = 1 to 8 for QPSK data modulation according to the delay spread. Consequently, by setting several combinations of spreading factors in the time and frequency domains, the near maximum link capacity is achieved both in cellular and hotspot cell configurations assuming various channel conditions.
- Publication
- IEICE TRANSACTIONS on Communications Vol.E88-B No.2 pp.487-498
- Publication Date
- 2005/02/01
- Publicized
- Online ISSN
- DOI
- 10.1093/ietcom/e88-b.2.487
- Type of Manuscript
- Special Section PAPER (Special Section on Multi-carrier Signal Processing Techniques for Next Generation Mobile Communications--Part2)
- Category
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Noriyuki MAEDA, Yoshihisa KISHIYAMA, Hiroyuki ATARASHI, Mamoru SAWAHASHI, "Variable Spreading Factor-OFCDM with Two Dimensional Spreading that Prioritizes Time Domain Spreading for Forward Link Broadband Wireless Access" in IEICE TRANSACTIONS on Communications,
vol. E88-B, no. 2, pp. 487-498, February 2005, doi: 10.1093/ietcom/e88-b.2.487.
Abstract: This paper proposes the optimum design for adaptively controlling the spreading factor in Orthogonal Frequency and Code Division Multiplexing (OFCDM) with two-dimensional spreading according to the cell configuration, channel load, and propagation channel conditions, assuming the adaptive modulation and channel coding (AMC) scheme employing QPSK and 16QAM data modulation. Furthermore, we propose a two-dimensional orthogonal channelization code assignment scheme to achieve skillfully orthogonal multiplexing of multiple physical channels. We first demonstrate the reduction effect of inter-code interference by the proposed two-dimensional orthogonal channelization code assignment. Then, computer simulation results show that in time domain spreading, the optimum spreading factor, except for an extremely high mobility case such as for the fading maximum Doppler frequency of fD = 1500 Hz, becomes SFTime = 16. Furthermore, it should be decreased to SFTime = 8 for such a very fast fading environment using 16QAM data modulation. We also clarify when the channel load is light such as Cmux/SF = 0.25 (Cmux and SF denote the number of multiplexed codes and total spreading factor, respectively), the required average received signal energy per symbol-to-noise power spectrum density ratio (Es/N0) is reduced as the spreading factor in the frequency domain is increased up to say SFFreq = 32 for QPSK and 16QAM data modulation. When the channel load is close to full such as when Cmux/SF = 0.94, the optimum spreading factor in the frequency domain is SFFreq = 1 for 16QAM data modulation and SFFreq = 1 to 8 for QPSK data modulation according to the delay spread. Consequently, by setting several combinations of spreading factors in the time and frequency domains, the near maximum link capacity is achieved both in cellular and hotspot cell configurations assuming various channel conditions.
URL: https://global.ieice.org/en_transactions/communications/10.1093/ietcom/e88-b.2.487/_p
Copy
@ARTICLE{e88-b_2_487,
author={Noriyuki MAEDA, Yoshihisa KISHIYAMA, Hiroyuki ATARASHI, Mamoru SAWAHASHI, },
journal={IEICE TRANSACTIONS on Communications},
title={Variable Spreading Factor-OFCDM with Two Dimensional Spreading that Prioritizes Time Domain Spreading for Forward Link Broadband Wireless Access},
year={2005},
volume={E88-B},
number={2},
pages={487-498},
abstract={This paper proposes the optimum design for adaptively controlling the spreading factor in Orthogonal Frequency and Code Division Multiplexing (OFCDM) with two-dimensional spreading according to the cell configuration, channel load, and propagation channel conditions, assuming the adaptive modulation and channel coding (AMC) scheme employing QPSK and 16QAM data modulation. Furthermore, we propose a two-dimensional orthogonal channelization code assignment scheme to achieve skillfully orthogonal multiplexing of multiple physical channels. We first demonstrate the reduction effect of inter-code interference by the proposed two-dimensional orthogonal channelization code assignment. Then, computer simulation results show that in time domain spreading, the optimum spreading factor, except for an extremely high mobility case such as for the fading maximum Doppler frequency of fD = 1500 Hz, becomes SFTime = 16. Furthermore, it should be decreased to SFTime = 8 for such a very fast fading environment using 16QAM data modulation. We also clarify when the channel load is light such as Cmux/SF = 0.25 (Cmux and SF denote the number of multiplexed codes and total spreading factor, respectively), the required average received signal energy per symbol-to-noise power spectrum density ratio (Es/N0) is reduced as the spreading factor in the frequency domain is increased up to say SFFreq = 32 for QPSK and 16QAM data modulation. When the channel load is close to full such as when Cmux/SF = 0.94, the optimum spreading factor in the frequency domain is SFFreq = 1 for 16QAM data modulation and SFFreq = 1 to 8 for QPSK data modulation according to the delay spread. Consequently, by setting several combinations of spreading factors in the time and frequency domains, the near maximum link capacity is achieved both in cellular and hotspot cell configurations assuming various channel conditions.},
keywords={},
doi={10.1093/ietcom/e88-b.2.487},
ISSN={},
month={February},}
Copy
TY - JOUR
TI - Variable Spreading Factor-OFCDM with Two Dimensional Spreading that Prioritizes Time Domain Spreading for Forward Link Broadband Wireless Access
T2 - IEICE TRANSACTIONS on Communications
SP - 487
EP - 498
AU - Noriyuki MAEDA
AU - Yoshihisa KISHIYAMA
AU - Hiroyuki ATARASHI
AU - Mamoru SAWAHASHI
PY - 2005
DO - 10.1093/ietcom/e88-b.2.487
JO - IEICE TRANSACTIONS on Communications
SN -
VL - E88-B
IS - 2
JA - IEICE TRANSACTIONS on Communications
Y1 - February 2005
AB - This paper proposes the optimum design for adaptively controlling the spreading factor in Orthogonal Frequency and Code Division Multiplexing (OFCDM) with two-dimensional spreading according to the cell configuration, channel load, and propagation channel conditions, assuming the adaptive modulation and channel coding (AMC) scheme employing QPSK and 16QAM data modulation. Furthermore, we propose a two-dimensional orthogonal channelization code assignment scheme to achieve skillfully orthogonal multiplexing of multiple physical channels. We first demonstrate the reduction effect of inter-code interference by the proposed two-dimensional orthogonal channelization code assignment. Then, computer simulation results show that in time domain spreading, the optimum spreading factor, except for an extremely high mobility case such as for the fading maximum Doppler frequency of fD = 1500 Hz, becomes SFTime = 16. Furthermore, it should be decreased to SFTime = 8 for such a very fast fading environment using 16QAM data modulation. We also clarify when the channel load is light such as Cmux/SF = 0.25 (Cmux and SF denote the number of multiplexed codes and total spreading factor, respectively), the required average received signal energy per symbol-to-noise power spectrum density ratio (Es/N0) is reduced as the spreading factor in the frequency domain is increased up to say SFFreq = 32 for QPSK and 16QAM data modulation. When the channel load is close to full such as when Cmux/SF = 0.94, the optimum spreading factor in the frequency domain is SFFreq = 1 for 16QAM data modulation and SFFreq = 1 to 8 for QPSK data modulation according to the delay spread. Consequently, by setting several combinations of spreading factors in the time and frequency domains, the near maximum link capacity is achieved both in cellular and hotspot cell configurations assuming various channel conditions.
ER -
English
