In order to efficiently mitigate emissions radiated from electrical equipment, emission source visualization methods need to be studied. In this paper, we propose a new macroscopic visualization method based on an optimization process which uses only cylindrically-scanned electric field amplitude data from an EMI test facility as specified by CISPR, and so does not need a special measurement system. The presented method divides the visualization space into three-dimensional rectangular cells, and estimated current values through the optimization process are sorted into each corresponding cell. By displaying the summed value of every cell, the emission source can be visualized. For this study, the spatial resolution was evaluated by computer simulation, with a result of around 0.2 m using a cell size of 0.1 m. With subsequent experimental verification using a comb generator in a semi-anechoic chamber, the visualization deviation was found to be less than 0.1 m in a frequency range of 100 MHz to 800 MHz. When two spherical dipole antennas were used, the deviation was less than 0.15 m. Finally, visualization results from a facsimile unit and a PC as real EUTs were shown and basic applicability of this method demonstrated.
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Yasuhiro ISHIDA, Masato KAWABATA, Nobuo KUWABARA, "Macroscopic Visualization of a Radiated Emission Source Using Cylindrically Scanned Electric Field Amplitude Data" in IEICE TRANSACTIONS on Communications,
vol. E89-B, no. 7, pp. 2061-2070, July 2006, doi: 10.1093/ietcom/e89-b.7.2061.
Abstract: In order to efficiently mitigate emissions radiated from electrical equipment, emission source visualization methods need to be studied. In this paper, we propose a new macroscopic visualization method based on an optimization process which uses only cylindrically-scanned electric field amplitude data from an EMI test facility as specified by CISPR, and so does not need a special measurement system. The presented method divides the visualization space into three-dimensional rectangular cells, and estimated current values through the optimization process are sorted into each corresponding cell. By displaying the summed value of every cell, the emission source can be visualized. For this study, the spatial resolution was evaluated by computer simulation, with a result of around 0.2 m using a cell size of 0.1 m. With subsequent experimental verification using a comb generator in a semi-anechoic chamber, the visualization deviation was found to be less than 0.1 m in a frequency range of 100 MHz to 800 MHz. When two spherical dipole antennas were used, the deviation was less than 0.15 m. Finally, visualization results from a facsimile unit and a PC as real EUTs were shown and basic applicability of this method demonstrated.
URL: https://global.ieice.org/en_transactions/communications/10.1093/ietcom/e89-b.7.2061/_p
Copy
@ARTICLE{e89-b_7_2061,
author={Yasuhiro ISHIDA, Masato KAWABATA, Nobuo KUWABARA, },
journal={IEICE TRANSACTIONS on Communications},
title={Macroscopic Visualization of a Radiated Emission Source Using Cylindrically Scanned Electric Field Amplitude Data},
year={2006},
volume={E89-B},
number={7},
pages={2061-2070},
abstract={In order to efficiently mitigate emissions radiated from electrical equipment, emission source visualization methods need to be studied. In this paper, we propose a new macroscopic visualization method based on an optimization process which uses only cylindrically-scanned electric field amplitude data from an EMI test facility as specified by CISPR, and so does not need a special measurement system. The presented method divides the visualization space into three-dimensional rectangular cells, and estimated current values through the optimization process are sorted into each corresponding cell. By displaying the summed value of every cell, the emission source can be visualized. For this study, the spatial resolution was evaluated by computer simulation, with a result of around 0.2 m using a cell size of 0.1 m. With subsequent experimental verification using a comb generator in a semi-anechoic chamber, the visualization deviation was found to be less than 0.1 m in a frequency range of 100 MHz to 800 MHz. When two spherical dipole antennas were used, the deviation was less than 0.15 m. Finally, visualization results from a facsimile unit and a PC as real EUTs were shown and basic applicability of this method demonstrated.},
keywords={},
doi={10.1093/ietcom/e89-b.7.2061},
ISSN={1745-1345},
month={July},}
Copy
TY - JOUR
TI - Macroscopic Visualization of a Radiated Emission Source Using Cylindrically Scanned Electric Field Amplitude Data
T2 - IEICE TRANSACTIONS on Communications
SP - 2061
EP - 2070
AU - Yasuhiro ISHIDA
AU - Masato KAWABATA
AU - Nobuo KUWABARA
PY - 2006
DO - 10.1093/ietcom/e89-b.7.2061
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E89-B
IS - 7
JA - IEICE TRANSACTIONS on Communications
Y1 - July 2006
AB - In order to efficiently mitigate emissions radiated from electrical equipment, emission source visualization methods need to be studied. In this paper, we propose a new macroscopic visualization method based on an optimization process which uses only cylindrically-scanned electric field amplitude data from an EMI test facility as specified by CISPR, and so does not need a special measurement system. The presented method divides the visualization space into three-dimensional rectangular cells, and estimated current values through the optimization process are sorted into each corresponding cell. By displaying the summed value of every cell, the emission source can be visualized. For this study, the spatial resolution was evaluated by computer simulation, with a result of around 0.2 m using a cell size of 0.1 m. With subsequent experimental verification using a comb generator in a semi-anechoic chamber, the visualization deviation was found to be less than 0.1 m in a frequency range of 100 MHz to 800 MHz. When two spherical dipole antennas were used, the deviation was less than 0.15 m. Finally, visualization results from a facsimile unit and a PC as real EUTs were shown and basic applicability of this method demonstrated.
ER -