Performance Evaluation of a New CRY Collision Detection Method for Passive Optical CSMA/CD LANs
Summary :
This paper describes theoretical analyses of a new CRV (Code Rule Violation) collision detection method applicable to an optical CSMA/CD LANs. The new method is based on the ideas combining a partial response (1,0, --1) circuit with the basic CRV collision detection method; the ideas are proposed in IEEE 802.3 committee. The circuit configuration of the new method, however, is different from that proposed in IEEE 802.3 committee. First, the paper outlines the basic CRV collision detection method and shows the problem that it can't detect a collision when identical bits are continuously received. Secondly, a practical circuit configuration of the new method is introduced. To realize large optical dynamic range and stability in collision detection, the circuit is designed not to detect CRVs on noisy zero level signals caused by signal negation with partial response circuits. The calculation formulae are then derived for the basic and the new method to determine the CRV rate with and without signal collision. At a bit rate of 10Mb/s, the CRV rate with and without signal collision is then calculated for the basic and the new method. Finally, the calculation results are compared with each other, and it is clarified that the new method is an effective method to increase CRV rate when signal collision occurs.
- Publication
- IEICE TRANSACTIONS on Communications Vol.E74-B No.9 pp.2703-2711
- Publication Date
- 1991/09/25
- Publicized
- Online ISSN
- DOI
- Type of Manuscript
- Special Section PAPER (Special Issue on LAN: High Speed, Multimedia, and Reliability)
- Category
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Yoshiro HAKAMATA, Nobushige YOKOTA, "Performance Evaluation of a New CRY Collision Detection Method for Passive Optical CSMA/CD LANs" in IEICE TRANSACTIONS on Communications,
vol. E74-B, no. 9, pp. 2703-2711, September 1991, doi: .
Abstract: This paper describes theoretical analyses of a new CRV (Code Rule Violation) collision detection method applicable to an optical CSMA/CD LANs. The new method is based on the ideas combining a partial response (1,0, --1) circuit with the basic CRV collision detection method; the ideas are proposed in IEEE 802.3 committee. The circuit configuration of the new method, however, is different from that proposed in IEEE 802.3 committee. First, the paper outlines the basic CRV collision detection method and shows the problem that it can't detect a collision when identical bits are continuously received. Secondly, a practical circuit configuration of the new method is introduced. To realize large optical dynamic range and stability in collision detection, the circuit is designed not to detect CRVs on noisy zero level signals caused by signal negation with partial response circuits. The calculation formulae are then derived for the basic and the new method to determine the CRV rate with and without signal collision. At a bit rate of 10Mb/s, the CRV rate with and without signal collision is then calculated for the basic and the new method. Finally, the calculation results are compared with each other, and it is clarified that the new method is an effective method to increase CRV rate when signal collision occurs.
URL: https://global.ieice.org/en_transactions/communications/10.1587/e74-b_9_2703/_p
Copy
@ARTICLE{e74-b_9_2703,
author={Yoshiro HAKAMATA, Nobushige YOKOTA, },
journal={IEICE TRANSACTIONS on Communications},
title={Performance Evaluation of a New CRY Collision Detection Method for Passive Optical CSMA/CD LANs},
year={1991},
volume={E74-B},
number={9},
pages={2703-2711},
abstract={This paper describes theoretical analyses of a new CRV (Code Rule Violation) collision detection method applicable to an optical CSMA/CD LANs. The new method is based on the ideas combining a partial response (1,0, --1) circuit with the basic CRV collision detection method; the ideas are proposed in IEEE 802.3 committee. The circuit configuration of the new method, however, is different from that proposed in IEEE 802.3 committee. First, the paper outlines the basic CRV collision detection method and shows the problem that it can't detect a collision when identical bits are continuously received. Secondly, a practical circuit configuration of the new method is introduced. To realize large optical dynamic range and stability in collision detection, the circuit is designed not to detect CRVs on noisy zero level signals caused by signal negation with partial response circuits. The calculation formulae are then derived for the basic and the new method to determine the CRV rate with and without signal collision. At a bit rate of 10Mb/s, the CRV rate with and without signal collision is then calculated for the basic and the new method. Finally, the calculation results are compared with each other, and it is clarified that the new method is an effective method to increase CRV rate when signal collision occurs.},
keywords={},
doi={},
ISSN={},
month={September},}
Copy
TY - JOUR
TI - Performance Evaluation of a New CRY Collision Detection Method for Passive Optical CSMA/CD LANs
T2 - IEICE TRANSACTIONS on Communications
SP - 2703
EP - 2711
AU - Yoshiro HAKAMATA
AU - Nobushige YOKOTA
PY - 1991
DO -
JO - IEICE TRANSACTIONS on Communications
SN -
VL - E74-B
IS - 9
JA - IEICE TRANSACTIONS on Communications
Y1 - September 1991
AB - This paper describes theoretical analyses of a new CRV (Code Rule Violation) collision detection method applicable to an optical CSMA/CD LANs. The new method is based on the ideas combining a partial response (1,0, --1) circuit with the basic CRV collision detection method; the ideas are proposed in IEEE 802.3 committee. The circuit configuration of the new method, however, is different from that proposed in IEEE 802.3 committee. First, the paper outlines the basic CRV collision detection method and shows the problem that it can't detect a collision when identical bits are continuously received. Secondly, a practical circuit configuration of the new method is introduced. To realize large optical dynamic range and stability in collision detection, the circuit is designed not to detect CRVs on noisy zero level signals caused by signal negation with partial response circuits. The calculation formulae are then derived for the basic and the new method to determine the CRV rate with and without signal collision. At a bit rate of 10Mb/s, the CRV rate with and without signal collision is then calculated for the basic and the new method. Finally, the calculation results are compared with each other, and it is clarified that the new method is an effective method to increase CRV rate when signal collision occurs.
ER -
English
