A method of determining emission limits was studied by using the amplitude probability distribution (APD) for low-probability pulsed electromagnetic disturbances due to discharge. The features of this method are 1) without using the previously reported relationship between APD and bit error rate, the limits are derived using the measured impact of a pulsed disturbance on various wireless communication systems having different bandwidths, and 2) disturbances caused by discharge with poor reproducibility are simulated by regularly repeated pulse-modulated sine waves to enable stable evaluation of the communication quality. APD-based limits are determined from the pulse repetition frequency of the simulated disturbance such that the block error rate (BLER) is less than a certain limit in wireless systems that are most sensitive to the pulsed disturbance. In the international standard CISPR 32 regulating electromagnetic disturbance, radiated disturbance due to discharge is excluded from the application of peak detection limits because of its low occurrence probability. In this paper we quantitatively determine appropriate criteria of the probability for the exclusion. Using the method, we measured the impact of low-probability pulsed interference on major wireless systems and found that GSM and Wi-Fi systems were the most sensitive. New APD-based limits were derived on the basis of these findings. The APD-based limits determined by the proposed method enable a valid evaluation of low-occurrence-probability pulsed disturbances without unconditionally excluding the measurement.
Toshio CHIYOJIMA
PFU Limited
Akihiro ODA
UL Japan
Go ISHIWATA
UL Japan
Kazuhiro TAKAYA
NTT
Yasushi MATSUMOTO
NICT
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Copy
Toshio CHIYOJIMA, Akihiro ODA, Go ISHIWATA, Kazuhiro TAKAYA, Yasushi MATSUMOTO, "Method for Defining APD-Based Emission Limit for Electromagnetic Pulsed Disturbance with Low Probability of Occurrence" in IEICE TRANSACTIONS on Communications,
vol. E103-B, no. 9, pp. 911-921, September 2020, doi: 10.1587/transcom.2019MCP0003.
Abstract: A method of determining emission limits was studied by using the amplitude probability distribution (APD) for low-probability pulsed electromagnetic disturbances due to discharge. The features of this method are 1) without using the previously reported relationship between APD and bit error rate, the limits are derived using the measured impact of a pulsed disturbance on various wireless communication systems having different bandwidths, and 2) disturbances caused by discharge with poor reproducibility are simulated by regularly repeated pulse-modulated sine waves to enable stable evaluation of the communication quality. APD-based limits are determined from the pulse repetition frequency of the simulated disturbance such that the block error rate (BLER) is less than a certain limit in wireless systems that are most sensitive to the pulsed disturbance. In the international standard CISPR 32 regulating electromagnetic disturbance, radiated disturbance due to discharge is excluded from the application of peak detection limits because of its low occurrence probability. In this paper we quantitatively determine appropriate criteria of the probability for the exclusion. Using the method, we measured the impact of low-probability pulsed interference on major wireless systems and found that GSM and Wi-Fi systems were the most sensitive. New APD-based limits were derived on the basis of these findings. The APD-based limits determined by the proposed method enable a valid evaluation of low-occurrence-probability pulsed disturbances without unconditionally excluding the measurement.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.2019MCP0003/_p
Copy
@ARTICLE{e103-b_9_911,
author={Toshio CHIYOJIMA, Akihiro ODA, Go ISHIWATA, Kazuhiro TAKAYA, Yasushi MATSUMOTO, },
journal={IEICE TRANSACTIONS on Communications},
title={Method for Defining APD-Based Emission Limit for Electromagnetic Pulsed Disturbance with Low Probability of Occurrence},
year={2020},
volume={E103-B},
number={9},
pages={911-921},
abstract={A method of determining emission limits was studied by using the amplitude probability distribution (APD) for low-probability pulsed electromagnetic disturbances due to discharge. The features of this method are 1) without using the previously reported relationship between APD and bit error rate, the limits are derived using the measured impact of a pulsed disturbance on various wireless communication systems having different bandwidths, and 2) disturbances caused by discharge with poor reproducibility are simulated by regularly repeated pulse-modulated sine waves to enable stable evaluation of the communication quality. APD-based limits are determined from the pulse repetition frequency of the simulated disturbance such that the block error rate (BLER) is less than a certain limit in wireless systems that are most sensitive to the pulsed disturbance. In the international standard CISPR 32 regulating electromagnetic disturbance, radiated disturbance due to discharge is excluded from the application of peak detection limits because of its low occurrence probability. In this paper we quantitatively determine appropriate criteria of the probability for the exclusion. Using the method, we measured the impact of low-probability pulsed interference on major wireless systems and found that GSM and Wi-Fi systems were the most sensitive. New APD-based limits were derived on the basis of these findings. The APD-based limits determined by the proposed method enable a valid evaluation of low-occurrence-probability pulsed disturbances without unconditionally excluding the measurement.},
keywords={},
doi={10.1587/transcom.2019MCP0003},
ISSN={1745-1345},
month={September},}
Copy
TY - JOUR
TI - Method for Defining APD-Based Emission Limit for Electromagnetic Pulsed Disturbance with Low Probability of Occurrence
T2 - IEICE TRANSACTIONS on Communications
SP - 911
EP - 921
AU - Toshio CHIYOJIMA
AU - Akihiro ODA
AU - Go ISHIWATA
AU - Kazuhiro TAKAYA
AU - Yasushi MATSUMOTO
PY - 2020
DO - 10.1587/transcom.2019MCP0003
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E103-B
IS - 9
JA - IEICE TRANSACTIONS on Communications
Y1 - September 2020
AB - A method of determining emission limits was studied by using the amplitude probability distribution (APD) for low-probability pulsed electromagnetic disturbances due to discharge. The features of this method are 1) without using the previously reported relationship between APD and bit error rate, the limits are derived using the measured impact of a pulsed disturbance on various wireless communication systems having different bandwidths, and 2) disturbances caused by discharge with poor reproducibility are simulated by regularly repeated pulse-modulated sine waves to enable stable evaluation of the communication quality. APD-based limits are determined from the pulse repetition frequency of the simulated disturbance such that the block error rate (BLER) is less than a certain limit in wireless systems that are most sensitive to the pulsed disturbance. In the international standard CISPR 32 regulating electromagnetic disturbance, radiated disturbance due to discharge is excluded from the application of peak detection limits because of its low occurrence probability. In this paper we quantitatively determine appropriate criteria of the probability for the exclusion. Using the method, we measured the impact of low-probability pulsed interference on major wireless systems and found that GSM and Wi-Fi systems were the most sensitive. New APD-based limits were derived on the basis of these findings. The APD-based limits determined by the proposed method enable a valid evaluation of low-occurrence-probability pulsed disturbances without unconditionally excluding the measurement.
ER -