IEICE TRANSACTIONS on Communications
Design and Evaluation of 10 Gbps Optical Access System Using Optical Switches
Summary :
We propose an optical switch control procedure for the Active Optical Access System (AOAS). Optical switches are used in AOAS instead of optical splitters in PON. In the proposed procedure, an OLT determines the switching schedules of optical switches on OSW (Optical Switching Unit) which is installed between OLT and ONU, and informs the OSW of them with a switch control frame preceding of data frame transmission. Then the switch controller on OSW controls the optical switches based on the switching schedules. We developed the prototype systems of OSW, OLT, and ONU. We implemented the optical switch control function with logic circuits on the prototype systems. We demonstrate the proposed procedure works effectively with logic circuits. We also evaluate the 10 Gps optical signal transmission between OLT and ONU. We demonstrate the receiver sensibility on OLT and ONU achieves the distance of 40 km for optical signals transmission with FEC (Forward Error Correction). These receivers are applicable for both AOAS and 10G-EPON.
- Publication
- IEICE TRANSACTIONS on Communications Vol.E93-B No.2 pp.272-279
- Publication Date
- 2010/02/01
- Publicized
- Online ISSN
- 1745-1345
- DOI
- 10.1587/transcom.E93.B.272
- Type of Manuscript
- Special Section PAPER (Special Section on Optical Access Technologies)
- Category
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Koji WAKAYAMA, Michitaka OKUNO, Jun SUGAWA, Daisuke MASHIMO, Hiroki IKEDA, Kenichi SAKAMOTO, "Design and Evaluation of 10 Gbps Optical Access System Using Optical Switches" in IEICE TRANSACTIONS on Communications,
vol. E93-B, no. 2, pp. 272-279, February 2010, doi: 10.1587/transcom.E93.B.272.
Abstract: We propose an optical switch control procedure for the Active Optical Access System (AOAS). Optical switches are used in AOAS instead of optical splitters in PON. In the proposed procedure, an OLT determines the switching schedules of optical switches on OSW (Optical Switching Unit) which is installed between OLT and ONU, and informs the OSW of them with a switch control frame preceding of data frame transmission. Then the switch controller on OSW controls the optical switches based on the switching schedules. We developed the prototype systems of OSW, OLT, and ONU. We implemented the optical switch control function with logic circuits on the prototype systems. We demonstrate the proposed procedure works effectively with logic circuits. We also evaluate the 10 Gps optical signal transmission between OLT and ONU. We demonstrate the receiver sensibility on OLT and ONU achieves the distance of 40 km for optical signals transmission with FEC (Forward Error Correction). These receivers are applicable for both AOAS and 10G-EPON.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.E93.B.272/_p
Copy
@ARTICLE{e93-b_2_272,
author={Koji WAKAYAMA, Michitaka OKUNO, Jun SUGAWA, Daisuke MASHIMO, Hiroki IKEDA, Kenichi SAKAMOTO, },
journal={IEICE TRANSACTIONS on Communications},
title={Design and Evaluation of 10 Gbps Optical Access System Using Optical Switches},
year={2010},
volume={E93-B},
number={2},
pages={272-279},
abstract={We propose an optical switch control procedure for the Active Optical Access System (AOAS). Optical switches are used in AOAS instead of optical splitters in PON. In the proposed procedure, an OLT determines the switching schedules of optical switches on OSW (Optical Switching Unit) which is installed between OLT and ONU, and informs the OSW of them with a switch control frame preceding of data frame transmission. Then the switch controller on OSW controls the optical switches based on the switching schedules. We developed the prototype systems of OSW, OLT, and ONU. We implemented the optical switch control function with logic circuits on the prototype systems. We demonstrate the proposed procedure works effectively with logic circuits. We also evaluate the 10 Gps optical signal transmission between OLT and ONU. We demonstrate the receiver sensibility on OLT and ONU achieves the distance of 40 km for optical signals transmission with FEC (Forward Error Correction). These receivers are applicable for both AOAS and 10G-EPON.},
keywords={},
doi={10.1587/transcom.E93.B.272},
ISSN={1745-1345},
month={February},}
Copy
TY - JOUR
TI - Design and Evaluation of 10 Gbps Optical Access System Using Optical Switches
T2 - IEICE TRANSACTIONS on Communications
SP - 272
EP - 279
AU - Koji WAKAYAMA
AU - Michitaka OKUNO
AU - Jun SUGAWA
AU - Daisuke MASHIMO
AU - Hiroki IKEDA
AU - Kenichi SAKAMOTO
PY - 2010
DO - 10.1587/transcom.E93.B.272
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E93-B
IS - 2
JA - IEICE TRANSACTIONS on Communications
Y1 - February 2010
AB - We propose an optical switch control procedure for the Active Optical Access System (AOAS). Optical switches are used in AOAS instead of optical splitters in PON. In the proposed procedure, an OLT determines the switching schedules of optical switches on OSW (Optical Switching Unit) which is installed between OLT and ONU, and informs the OSW of them with a switch control frame preceding of data frame transmission. Then the switch controller on OSW controls the optical switches based on the switching schedules. We developed the prototype systems of OSW, OLT, and ONU. We implemented the optical switch control function with logic circuits on the prototype systems. We demonstrate the proposed procedure works effectively with logic circuits. We also evaluate the 10 Gps optical signal transmission between OLT and ONU. We demonstrate the receiver sensibility on OLT and ONU achieves the distance of 40 km for optical signals transmission with FEC (Forward Error Correction). These receivers are applicable for both AOAS and 10G-EPON.
ER -
English
