IEICE TRANSACTIONS on Communications
Imaging Radio-Frequency Power Distributions by an EBG Absorber
Summary :
A thin electromagnetic band-gap (EBG) absorber is employed to capture the 2-d image of radio-frequency (RF) power distribution. The EBG absorber consists of an array of mushroom unit cells formed on a thin dielectric substrate with a metal backplane, and lumped resistors interconnecting the surface patches of the mushrooms. Around the resonance frequency at which the EBG structure acts as a high-impedance surface, the RF power incident on the surface is absorbed by the lumped resistors which are matched with the incident wave impedance. By detecting directly the amounts of power consumed by the individual resistors, an “RF power imager” can be constructed which captures the 2-d distribution of the RF power illuminating the EBG surface, where polarization discrimination is possible. The resonance (i.e., absorption) frequency is made tunable by adding varactor diodes in parallel with the lumped resistors. The EBG absorber tunable in the frequency range of 700 MHz–2.7 GHz is designed and fabricated, and its performance is evaluated by an equivalent-circuit analysis, simulation and measurement. It is shown that the small resistance of the varactors have a considerable effect on the absorption performance. RF power distributions radiated from a dipole antenna are successfully measured by a matrix of sensitive power detectors installed on the backside of the absorber. Using such an RF power imager, the power distributions of even impulsive RF signals and/or noises can be captured and visualized in situ and in real-time, while the electromagnetic environment is almost undisturbed by the EBG absorber.
- Publication
- IEICE TRANSACTIONS on Communications Vol.E94-B No.8 pp.2306-2315
- Publication Date
- 2011/08/01
- Publicized
- Online ISSN
- 1745-1345
- DOI
- 10.1587/transcom.E94.B.2306
- Type of Manuscript
- PAPER
- Category
- Electromagnetic Compatibility(EMC)
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Satoshi YAGITANI, Keigo KATSUDA, Masayuki NOJIMA, Yoshiyuki YOSHIMURA, Hirokazu SUGIURA, "Imaging Radio-Frequency Power Distributions by an EBG Absorber" in IEICE TRANSACTIONS on Communications,
vol. E94-B, no. 8, pp. 2306-2315, August 2011, doi: 10.1587/transcom.E94.B.2306.
Abstract: A thin electromagnetic band-gap (EBG) absorber is employed to capture the 2-d image of radio-frequency (RF) power distribution. The EBG absorber consists of an array of mushroom unit cells formed on a thin dielectric substrate with a metal backplane, and lumped resistors interconnecting the surface patches of the mushrooms. Around the resonance frequency at which the EBG structure acts as a high-impedance surface, the RF power incident on the surface is absorbed by the lumped resistors which are matched with the incident wave impedance. By detecting directly the amounts of power consumed by the individual resistors, an “RF power imager” can be constructed which captures the 2-d distribution of the RF power illuminating the EBG surface, where polarization discrimination is possible. The resonance (i.e., absorption) frequency is made tunable by adding varactor diodes in parallel with the lumped resistors. The EBG absorber tunable in the frequency range of 700 MHz–2.7 GHz is designed and fabricated, and its performance is evaluated by an equivalent-circuit analysis, simulation and measurement. It is shown that the small resistance of the varactors have a considerable effect on the absorption performance. RF power distributions radiated from a dipole antenna are successfully measured by a matrix of sensitive power detectors installed on the backside of the absorber. Using such an RF power imager, the power distributions of even impulsive RF signals and/or noises can be captured and visualized in situ and in real-time, while the electromagnetic environment is almost undisturbed by the EBG absorber.
URL: https://global.ieice.org/en_transactions/communications/10.1587/transcom.E94.B.2306/_p
Copy
@ARTICLE{e94-b_8_2306,
author={Satoshi YAGITANI, Keigo KATSUDA, Masayuki NOJIMA, Yoshiyuki YOSHIMURA, Hirokazu SUGIURA, },
journal={IEICE TRANSACTIONS on Communications},
title={Imaging Radio-Frequency Power Distributions by an EBG Absorber},
year={2011},
volume={E94-B},
number={8},
pages={2306-2315},
abstract={A thin electromagnetic band-gap (EBG) absorber is employed to capture the 2-d image of radio-frequency (RF) power distribution. The EBG absorber consists of an array of mushroom unit cells formed on a thin dielectric substrate with a metal backplane, and lumped resistors interconnecting the surface patches of the mushrooms. Around the resonance frequency at which the EBG structure acts as a high-impedance surface, the RF power incident on the surface is absorbed by the lumped resistors which are matched with the incident wave impedance. By detecting directly the amounts of power consumed by the individual resistors, an “RF power imager” can be constructed which captures the 2-d distribution of the RF power illuminating the EBG surface, where polarization discrimination is possible. The resonance (i.e., absorption) frequency is made tunable by adding varactor diodes in parallel with the lumped resistors. The EBG absorber tunable in the frequency range of 700 MHz–2.7 GHz is designed and fabricated, and its performance is evaluated by an equivalent-circuit analysis, simulation and measurement. It is shown that the small resistance of the varactors have a considerable effect on the absorption performance. RF power distributions radiated from a dipole antenna are successfully measured by a matrix of sensitive power detectors installed on the backside of the absorber. Using such an RF power imager, the power distributions of even impulsive RF signals and/or noises can be captured and visualized in situ and in real-time, while the electromagnetic environment is almost undisturbed by the EBG absorber.},
keywords={},
doi={10.1587/transcom.E94.B.2306},
ISSN={1745-1345},
month={August},}
Copy
TY - JOUR
TI - Imaging Radio-Frequency Power Distributions by an EBG Absorber
T2 - IEICE TRANSACTIONS on Communications
SP - 2306
EP - 2315
AU - Satoshi YAGITANI
AU - Keigo KATSUDA
AU - Masayuki NOJIMA
AU - Yoshiyuki YOSHIMURA
AU - Hirokazu SUGIURA
PY - 2011
DO - 10.1587/transcom.E94.B.2306
JO - IEICE TRANSACTIONS on Communications
SN - 1745-1345
VL - E94-B
IS - 8
JA - IEICE TRANSACTIONS on Communications
Y1 - August 2011
AB - A thin electromagnetic band-gap (EBG) absorber is employed to capture the 2-d image of radio-frequency (RF) power distribution. The EBG absorber consists of an array of mushroom unit cells formed on a thin dielectric substrate with a metal backplane, and lumped resistors interconnecting the surface patches of the mushrooms. Around the resonance frequency at which the EBG structure acts as a high-impedance surface, the RF power incident on the surface is absorbed by the lumped resistors which are matched with the incident wave impedance. By detecting directly the amounts of power consumed by the individual resistors, an “RF power imager” can be constructed which captures the 2-d distribution of the RF power illuminating the EBG surface, where polarization discrimination is possible. The resonance (i.e., absorption) frequency is made tunable by adding varactor diodes in parallel with the lumped resistors. The EBG absorber tunable in the frequency range of 700 MHz–2.7 GHz is designed and fabricated, and its performance is evaluated by an equivalent-circuit analysis, simulation and measurement. It is shown that the small resistance of the varactors have a considerable effect on the absorption performance. RF power distributions radiated from a dipole antenna are successfully measured by a matrix of sensitive power detectors installed on the backside of the absorber. Using such an RF power imager, the power distributions of even impulsive RF signals and/or noises can be captured and visualized in situ and in real-time, while the electromagnetic environment is almost undisturbed by the EBG absorber.
ER -
English
