MUSIC: A Novel Multilevel Simulator for Integrated Circuits

Zsolt Miklós KOVÁCS-VAJNA; Arrigo BENEDETTI; Sergio GRAFFI; Guido MASETTI

MUSIC: A Novel Multilevel Simulator for Integrated Circuits

Zsolt Miklós KOVÁCS-VAJNA, Arrigo BENEDETTI, Sergio GRAFFI, Guido MASETTI

Full Text Views

0

Cite this

Summary :

The increasing size and complexity of integrated circuits has lead to the development of advanced algorithms and techniques for circuit simulation. The majority of circuit simulators rely on the Newton-Raphson algorithm for the solution of nonlinear equations that arise from the circuit description. Unfortunately, a good estimate of the root to be found is needed for the algorithm to converge. The convergence rate of the algorithm is quadratic once the method gets "close enough" to the solution, but before reaching this point the method may follow a complex route through unrealistic values of the circuit variables, leading eventually to divergence. Simulations performed with SPICE on several test circuits reveal that during the first iterations of the Newton-Raphson algorithm internal node voltages exceed the power supply voltage of several orders of magnitudes even for simple circuits. A new simulation program called MUSIC (Multilevel Simulator for Integrated Circuits) has been developed to overcome these drawbacks. In MUSIC the circuit to be simulated is decomposed in subcircuits, which may contain instances of other subcircuits up to any nesting level. Subcircuits are then simulated independently with a multilevel Newton algorithm permitting to reduce both the large oscillations that circuit variables undergo during the simulation process and the number of iterations necessary for the circuit to converge. The novel feature of this multilevel algorithm is the propagation of the already calculated terminal voltages, which become known after a subcircuit has converged, to the subcircuits connected to same terminals. In this way the information regarding node voltages is propagated through the network without constraining conditions that do not have physical counterpart. Simulations performed on chains of inverters and a 4-bit full adder evidence how MUSIC is able to improve the convergence rate and to reduce the intermediate voltage spikes.

Publication: IEICE TRANSACTIONS on Electronics Vol.E77-C No.2 pp.206-213

Publication Date: 1994/02/25

Publicized

Online ISSN

DOI

Type of Manuscript: Special Section PAPER (Special Issue on 1993 VLSI Process and Device Modeling Workshop (VPAD 93))

Category: Coupled Device & Circuit Modeling

Cite this

Copy

Zsolt Miklós KOVÁCS-VAJNA, Arrigo BENEDETTI, Sergio GRAFFI, Guido MASETTI, "MUSIC: A Novel Multilevel Simulator for Integrated Circuits" in IEICE TRANSACTIONS on Electronics, vol. E77-C, no. 2, pp. 206-213, February 1994, doi: .
Abstract: The increasing size and complexity of integrated circuits has lead to the development of advanced algorithms and techniques for circuit simulation. The majority of circuit simulators rely on the Newton-Raphson algorithm for the solution of nonlinear equations that arise from the circuit description. Unfortunately, a good estimate of the root to be found is needed for the algorithm to converge. The convergence rate of the algorithm is quadratic once the method gets "close enough" to the solution, but before reaching this point the method may follow a complex route through unrealistic values of the circuit variables, leading eventually to divergence. Simulations performed with SPICE on several test circuits reveal that during the first iterations of the Newton-Raphson algorithm internal node voltages exceed the power supply voltage of several orders of magnitudes even for simple circuits. A new simulation program called MUSIC (Multilevel Simulator for Integrated Circuits) has been developed to overcome these drawbacks. In MUSIC the circuit to be simulated is decomposed in subcircuits, which may contain instances of other subcircuits up to any nesting level. Subcircuits are then simulated independently with a multilevel Newton algorithm permitting to reduce both the large oscillations that circuit variables undergo during the simulation process and the number of iterations necessary for the circuit to converge. The novel feature of this multilevel algorithm is the propagation of the already calculated terminal voltages, which become known after a subcircuit has converged, to the subcircuits connected to same terminals. In this way the information regarding node voltages is propagated through the network without constraining conditions that do not have physical counterpart. Simulations performed on chains of inverters and a 4-bit full adder evidence how MUSIC is able to improve the convergence rate and to reduce the intermediate voltage spikes.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e77-c_2_206/_p

Copy

@ARTICLE{e77-c_2_206,
author={Zsolt Miklós KOVÁCS-VAJNA, Arrigo BENEDETTI, Sergio GRAFFI, Guido MASETTI, },
journal={IEICE TRANSACTIONS on Electronics},
title={MUSIC: A Novel Multilevel Simulator for Integrated Circuits},
year={1994},
volume={E77-C},
number={2},
pages={206-213},
abstract={The increasing size and complexity of integrated circuits has lead to the development of advanced algorithms and techniques for circuit simulation. The majority of circuit simulators rely on the Newton-Raphson algorithm for the solution of nonlinear equations that arise from the circuit description. Unfortunately, a good estimate of the root to be found is needed for the algorithm to converge. The convergence rate of the algorithm is quadratic once the method gets "close enough" to the solution, but before reaching this point the method may follow a complex route through unrealistic values of the circuit variables, leading eventually to divergence. Simulations performed with SPICE on several test circuits reveal that during the first iterations of the Newton-Raphson algorithm internal node voltages exceed the power supply voltage of several orders of magnitudes even for simple circuits. A new simulation program called MUSIC (Multilevel Simulator for Integrated Circuits) has been developed to overcome these drawbacks. In MUSIC the circuit to be simulated is decomposed in subcircuits, which may contain instances of other subcircuits up to any nesting level. Subcircuits are then simulated independently with a multilevel Newton algorithm permitting to reduce both the large oscillations that circuit variables undergo during the simulation process and the number of iterations necessary for the circuit to converge. The novel feature of this multilevel algorithm is the propagation of the already calculated terminal voltages, which become known after a subcircuit has converged, to the subcircuits connected to same terminals. In this way the information regarding node voltages is propagated through the network without constraining conditions that do not have physical counterpart. Simulations performed on chains of inverters and a 4-bit full adder evidence how MUSIC is able to improve the convergence rate and to reduce the intermediate voltage spikes.},
keywords={},
doi={},
ISSN={},
month={February},}

Copy

TY - JOUR
TI - MUSIC: A Novel Multilevel Simulator for Integrated Circuits
T2 - IEICE TRANSACTIONS on Electronics
SP - 206
EP - 213
AU - Zsolt Miklós KOVÁCS-VAJNA
AU - Arrigo BENEDETTI
AU - Sergio GRAFFI
AU - Guido MASETTI
PY - 1994
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E77-C
IS - 2
JA - IEICE TRANSACTIONS on Electronics
Y1 - February 1994
AB - The increasing size and complexity of integrated circuits has lead to the development of advanced algorithms and techniques for circuit simulation. The majority of circuit simulators rely on the Newton-Raphson algorithm for the solution of nonlinear equations that arise from the circuit description. Unfortunately, a good estimate of the root to be found is needed for the algorithm to converge. The convergence rate of the algorithm is quadratic once the method gets "close enough" to the solution, but before reaching this point the method may follow a complex route through unrealistic values of the circuit variables, leading eventually to divergence. Simulations performed with SPICE on several test circuits reveal that during the first iterations of the Newton-Raphson algorithm internal node voltages exceed the power supply voltage of several orders of magnitudes even for simple circuits. A new simulation program called MUSIC (Multilevel Simulator for Integrated Circuits) has been developed to overcome these drawbacks. In MUSIC the circuit to be simulated is decomposed in subcircuits, which may contain instances of other subcircuits up to any nesting level. Subcircuits are then simulated independently with a multilevel Newton algorithm permitting to reduce both the large oscillations that circuit variables undergo during the simulation process and the number of iterations necessary for the circuit to converge. The novel feature of this multilevel algorithm is the propagation of the already calculated terminal voltages, which become known after a subcircuit has converged, to the subcircuits connected to same terminals. In this way the information regarding node voltages is propagated through the network without constraining conditions that do not have physical counterpart. Simulations performed on chains of inverters and a 4-bit full adder evidence how MUSIC is able to improve the convergence rate and to reduce the intermediate voltage spikes.
ER -