IEICE TRANSACTIONS on Electronics
ATM in B-ISDN Communication Systems and VISI Realization
Summary :
The Asynchronous Transfer Mode (ATM) is considered to be a key technology for B-ISDN. This paper discusses VLSI trends and how VLSI's can be applied to realize ATM switching node systems for B-ISDN. Implementing a practical ATM node system will require the development of technologies such as high-throughput ATM switch LSI's with up to 10 Gb/s capacity and SDH termination technology based on optical fiber transmission. An ATM traffic-handling mechanism with Quality of Service (QoS) controls such as ATM layer performance monitoring, virtual channel handling, usage parameter control, and VP shaping requires several hundred thousand logic gates and several megabytes of high-speed static RAM; VLSI's must be introduced if such mechanisms are to be implemented. ATM node system architecture is based on design principles of a building-block-type structure and hierarchical multiplexing. The basic ATM call handling module, the AHM, is composed mainly of a line termination block and a self-routing switch block; we analyzed this module from the viewpoint of the amount of hardware it requires. Finally, future ATM node systems are discussed on the basis of 0.2-µm VLSI development trends and hardware requirements such as the need for ultrahigh integration of logic gate with memory, multichip modules, and low power dissipation technology.
- Publication
- IEICE TRANSACTIONS on Electronics Vol.E78-C No.6 pp.589-595
- Publication Date
- 1995/06/25
- Publicized
- Online ISSN
- DOI
- Type of Manuscript
- Special Section PAPER (Special Issue on the 1994 VLSI Circuits Symposium (Joint Issue with the IEEE Journal of Solid-State Circuits, Vol. 30, No. 4 April 1995))
- Category
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Takeo KOINUMA, Noriharu MIYAHO, "ATM in B-ISDN Communication Systems and VISI Realization" in IEICE TRANSACTIONS on Electronics,
vol. E78-C, no. 6, pp. 589-595, June 1995, doi: .
Abstract: The Asynchronous Transfer Mode (ATM) is considered to be a key technology for B-ISDN. This paper discusses VLSI trends and how VLSI's can be applied to realize ATM switching node systems for B-ISDN. Implementing a practical ATM node system will require the development of technologies such as high-throughput ATM switch LSI's with up to 10 Gb/s capacity and SDH termination technology based on optical fiber transmission. An ATM traffic-handling mechanism with Quality of Service (QoS) controls such as ATM layer performance monitoring, virtual channel handling, usage parameter control, and VP shaping requires several hundred thousand logic gates and several megabytes of high-speed static RAM; VLSI's must be introduced if such mechanisms are to be implemented. ATM node system architecture is based on design principles of a building-block-type structure and hierarchical multiplexing. The basic ATM call handling module, the AHM, is composed mainly of a line termination block and a self-routing switch block; we analyzed this module from the viewpoint of the amount of hardware it requires. Finally, future ATM node systems are discussed on the basis of 0.2-µm VLSI development trends and hardware requirements such as the need for ultrahigh integration of logic gate with memory, multichip modules, and low power dissipation technology.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e78-c_6_589/_p
Copy
@ARTICLE{e78-c_6_589,
author={Takeo KOINUMA, Noriharu MIYAHO, },
journal={IEICE TRANSACTIONS on Electronics},
title={ATM in B-ISDN Communication Systems and VISI Realization},
year={1995},
volume={E78-C},
number={6},
pages={589-595},
abstract={The Asynchronous Transfer Mode (ATM) is considered to be a key technology for B-ISDN. This paper discusses VLSI trends and how VLSI's can be applied to realize ATM switching node systems for B-ISDN. Implementing a practical ATM node system will require the development of technologies such as high-throughput ATM switch LSI's with up to 10 Gb/s capacity and SDH termination technology based on optical fiber transmission. An ATM traffic-handling mechanism with Quality of Service (QoS) controls such as ATM layer performance monitoring, virtual channel handling, usage parameter control, and VP shaping requires several hundred thousand logic gates and several megabytes of high-speed static RAM; VLSI's must be introduced if such mechanisms are to be implemented. ATM node system architecture is based on design principles of a building-block-type structure and hierarchical multiplexing. The basic ATM call handling module, the AHM, is composed mainly of a line termination block and a self-routing switch block; we analyzed this module from the viewpoint of the amount of hardware it requires. Finally, future ATM node systems are discussed on the basis of 0.2-µm VLSI development trends and hardware requirements such as the need for ultrahigh integration of logic gate with memory, multichip modules, and low power dissipation technology.},
keywords={},
doi={},
ISSN={},
month={June},}
Copy
TY - JOUR
TI - ATM in B-ISDN Communication Systems and VISI Realization
T2 - IEICE TRANSACTIONS on Electronics
SP - 589
EP - 595
AU - Takeo KOINUMA
AU - Noriharu MIYAHO
PY - 1995
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E78-C
IS - 6
JA - IEICE TRANSACTIONS on Electronics
Y1 - June 1995
AB - The Asynchronous Transfer Mode (ATM) is considered to be a key technology for B-ISDN. This paper discusses VLSI trends and how VLSI's can be applied to realize ATM switching node systems for B-ISDN. Implementing a practical ATM node system will require the development of technologies such as high-throughput ATM switch LSI's with up to 10 Gb/s capacity and SDH termination technology based on optical fiber transmission. An ATM traffic-handling mechanism with Quality of Service (QoS) controls such as ATM layer performance monitoring, virtual channel handling, usage parameter control, and VP shaping requires several hundred thousand logic gates and several megabytes of high-speed static RAM; VLSI's must be introduced if such mechanisms are to be implemented. ATM node system architecture is based on design principles of a building-block-type structure and hierarchical multiplexing. The basic ATM call handling module, the AHM, is composed mainly of a line termination block and a self-routing switch block; we analyzed this module from the viewpoint of the amount of hardware it requires. Finally, future ATM node systems are discussed on the basis of 0.2-µm VLSI development trends and hardware requirements such as the need for ultrahigh integration of logic gate with memory, multichip modules, and low power dissipation technology.
ER -
English
