A Calculation Method of Large-Signal Characteristics of Multi-Stage Power Amplifier Modules Using Source-Pull and Load-Pull Data
Summary :
This paper describes a calculation method of large-signal characteristics of multi-stage power amplifier modules using source-pull and load-pull data. An output power, a power-added efficiency, and a phase deviation of multi-stage power amplifier modules are calculated based on the source-pull and load-pull data, which are comprised of input and output reflection coefficients, an input power, an output power, a phase deviation and a drain voltage and current, taking into account the source and load impedance of each stage FET. Applying this method to a 900 MHz two-stage Si-MOSFET power amplifier module, the calculated and measured results are in good agreement.
- Publication
- IEICE TRANSACTIONS on Electronics Vol.E81-C No.6 pp.904-910
- Publication Date
- 1998/06/25
- Publicized
- Online ISSN
- DOI
- Type of Manuscript
- Special Section PAPER (Special Issue on Microwave and Millimeter-Wave Module Technology)
- Category
- Semiconductor Devices and Amplifiers
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Kazutomi MORI, Yasushi ITOH, Katsuya KOMURO, Tadashi TAKAGI, "A Calculation Method of Large-Signal Characteristics of Multi-Stage Power Amplifier Modules Using Source-Pull and Load-Pull Data" in IEICE TRANSACTIONS on Electronics,
vol. E81-C, no. 6, pp. 904-910, June 1998, doi: .
Abstract: This paper describes a calculation method of large-signal characteristics of multi-stage power amplifier modules using source-pull and load-pull data. An output power, a power-added efficiency, and a phase deviation of multi-stage power amplifier modules are calculated based on the source-pull and load-pull data, which are comprised of input and output reflection coefficients, an input power, an output power, a phase deviation and a drain voltage and current, taking into account the source and load impedance of each stage FET. Applying this method to a 900 MHz two-stage Si-MOSFET power amplifier module, the calculated and measured results are in good agreement.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e81-c_6_904/_p
Copy
@ARTICLE{e81-c_6_904,
author={Kazutomi MORI, Yasushi ITOH, Katsuya KOMURO, Tadashi TAKAGI, },
journal={IEICE TRANSACTIONS on Electronics},
title={A Calculation Method of Large-Signal Characteristics of Multi-Stage Power Amplifier Modules Using Source-Pull and Load-Pull Data},
year={1998},
volume={E81-C},
number={6},
pages={904-910},
abstract={This paper describes a calculation method of large-signal characteristics of multi-stage power amplifier modules using source-pull and load-pull data. An output power, a power-added efficiency, and a phase deviation of multi-stage power amplifier modules are calculated based on the source-pull and load-pull data, which are comprised of input and output reflection coefficients, an input power, an output power, a phase deviation and a drain voltage and current, taking into account the source and load impedance of each stage FET. Applying this method to a 900 MHz two-stage Si-MOSFET power amplifier module, the calculated and measured results are in good agreement.},
keywords={},
doi={},
ISSN={},
month={June},}
Copy
TY - JOUR
TI - A Calculation Method of Large-Signal Characteristics of Multi-Stage Power Amplifier Modules Using Source-Pull and Load-Pull Data
T2 - IEICE TRANSACTIONS on Electronics
SP - 904
EP - 910
AU - Kazutomi MORI
AU - Yasushi ITOH
AU - Katsuya KOMURO
AU - Tadashi TAKAGI
PY - 1998
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E81-C
IS - 6
JA - IEICE TRANSACTIONS on Electronics
Y1 - June 1998
AB - This paper describes a calculation method of large-signal characteristics of multi-stage power amplifier modules using source-pull and load-pull data. An output power, a power-added efficiency, and a phase deviation of multi-stage power amplifier modules are calculated based on the source-pull and load-pull data, which are comprised of input and output reflection coefficients, an input power, an output power, a phase deviation and a drain voltage and current, taking into account the source and load impedance of each stage FET. Applying this method to a 900 MHz two-stage Si-MOSFET power amplifier module, the calculated and measured results are in good agreement.
ER -
English
