Dispersion Managed Optical Transmission Lines and Fibers

Yoshihisa SUZUKI; Kazunori MUKASA; Ryuichi SUGIZAKI; Kunio KOKURA

Dispersion Managed Optical Transmission Lines and Fibers

Yoshihisa SUZUKI, Kazunori MUKASA, Ryuichi SUGIZAKI, Kunio KOKURA

Full Text Views

0

Cite this

Summary :

There has been a rapid advance in wavelength-division multiplexing (WDM) and high bit-rate time-division multiplexing (TDM) as techniques for coping with burgeoning demand for transmission capacity. In the past this expansion of capacity has been achieved by 2.5-Gbit/s and 10-Gbit/s WDM using the C-band (around 1550 nm), but research on the 1600-nm L-band (around 1600 nm) is being stepped up to obtain further expansion. With the achievement of 40-Gbit/s speeds, which mark the limit of electrical signal processing, optical TDM, with speeds of 100 Gbit/s, is coming into use. In this kind of high-density, high bit-rate WDM transmission, the occurrence of non-linear phenomena within optical fibers reduces transmission quality, and this raises the importance of technology for suppressing non-linearity and specifically, in the case of WDM transmission systems, of four-wave mixing (FWM). Obviously there is also the problem of signal distortion due to dispersion, so that technology for suppressing cumulative dispersion is also essential. There is also a need for transmission lines with sophisticated dispersion management over a wide band of wavelengths, and it may be consisted of novel fibers.

Publication: IEICE TRANSACTIONS on Electronics Vol.E83-C No.6 pp.789-798

Publication Date: 2000/06/25

Publicized

Online ISSN

DOI

Type of Manuscript: Special Section INVITED PAPER (Special Issue on Advanced Optical Devices for Next Generation High-Speed Communication Systems and Photonic Networks)

Category: Fibers

Cite this

Copy

Yoshihisa SUZUKI, Kazunori MUKASA, Ryuichi SUGIZAKI, Kunio KOKURA, "Dispersion Managed Optical Transmission Lines and Fibers" in IEICE TRANSACTIONS on Electronics, vol. E83-C, no. 6, pp. 789-798, June 2000, doi: .
Abstract: There has been a rapid advance in wavelength-division multiplexing (WDM) and high bit-rate time-division multiplexing (TDM) as techniques for coping with burgeoning demand for transmission capacity. In the past this expansion of capacity has been achieved by 2.5-Gbit/s and 10-Gbit/s WDM using the C-band (around 1550 nm), but research on the 1600-nm L-band (around 1600 nm) is being stepped up to obtain further expansion. With the achievement of 40-Gbit/s speeds, which mark the limit of electrical signal processing, optical TDM, with speeds of 100 Gbit/s, is coming into use. In this kind of high-density, high bit-rate WDM transmission, the occurrence of non-linear phenomena within optical fibers reduces transmission quality, and this raises the importance of technology for suppressing non-linearity and specifically, in the case of WDM transmission systems, of four-wave mixing (FWM). Obviously there is also the problem of signal distortion due to dispersion, so that technology for suppressing cumulative dispersion is also essential. There is also a need for transmission lines with sophisticated dispersion management over a wide band of wavelengths, and it may be consisted of novel fibers.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e83-c_6_789/_p

Copy

@ARTICLE{e83-c_6_789,
author={Yoshihisa SUZUKI, Kazunori MUKASA, Ryuichi SUGIZAKI, Kunio KOKURA, },
journal={IEICE TRANSACTIONS on Electronics},
title={Dispersion Managed Optical Transmission Lines and Fibers},
year={2000},
volume={E83-C},
number={6},
pages={789-798},
abstract={There has been a rapid advance in wavelength-division multiplexing (WDM) and high bit-rate time-division multiplexing (TDM) as techniques for coping with burgeoning demand for transmission capacity. In the past this expansion of capacity has been achieved by 2.5-Gbit/s and 10-Gbit/s WDM using the C-band (around 1550 nm), but research on the 1600-nm L-band (around 1600 nm) is being stepped up to obtain further expansion. With the achievement of 40-Gbit/s speeds, which mark the limit of electrical signal processing, optical TDM, with speeds of 100 Gbit/s, is coming into use. In this kind of high-density, high bit-rate WDM transmission, the occurrence of non-linear phenomena within optical fibers reduces transmission quality, and this raises the importance of technology for suppressing non-linearity and specifically, in the case of WDM transmission systems, of four-wave mixing (FWM). Obviously there is also the problem of signal distortion due to dispersion, so that technology for suppressing cumulative dispersion is also essential. There is also a need for transmission lines with sophisticated dispersion management over a wide band of wavelengths, and it may be consisted of novel fibers.},
keywords={},
doi={},
ISSN={},
month={June},}

Copy

TY - JOUR
TI - Dispersion Managed Optical Transmission Lines and Fibers
T2 - IEICE TRANSACTIONS on Electronics
SP - 789
EP - 798
AU - Yoshihisa SUZUKI
AU - Kazunori MUKASA
AU - Ryuichi SUGIZAKI
AU - Kunio KOKURA
PY - 2000
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E83-C
IS - 6
JA - IEICE TRANSACTIONS on Electronics
Y1 - June 2000
AB - There has been a rapid advance in wavelength-division multiplexing (WDM) and high bit-rate time-division multiplexing (TDM) as techniques for coping with burgeoning demand for transmission capacity. In the past this expansion of capacity has been achieved by 2.5-Gbit/s and 10-Gbit/s WDM using the C-band (around 1550 nm), but research on the 1600-nm L-band (around 1600 nm) is being stepped up to obtain further expansion. With the achievement of 40-Gbit/s speeds, which mark the limit of electrical signal processing, optical TDM, with speeds of 100 Gbit/s, is coming into use. In this kind of high-density, high bit-rate WDM transmission, the occurrence of non-linear phenomena within optical fibers reduces transmission quality, and this raises the importance of technology for suppressing non-linearity and specifically, in the case of WDM transmission systems, of four-wave mixing (FWM). Obviously there is also the problem of signal distortion due to dispersion, so that technology for suppressing cumulative dispersion is also essential. There is also a need for transmission lines with sophisticated dispersion management over a wide band of wavelengths, and it may be consisted of novel fibers.
ER -