IEICE TRANSACTIONS on Electronics
Design of a Grooved Circular Cavity for Dielectric Substrate Measurements in Millimeter Wave Region
Summary :
A grooved circular cavity is designed for the millimeter wave measurements of dielectric substrates. The grooves are introduced to separate the degenerate TE01p and TM11p modes in circular cavities. A rigorous mode-matching method is used to investigate the influence of grooves on both the TE01p and TM11p modes. The dimensions of the grooves are determined from the numerical results. Comparative experiments of circular cavities with and without grooves validate the design method.
- Publication
- IEICE TRANSACTIONS on Electronics Vol.E86-C No.8 pp.1715-1720
- Publication Date
- 2003/08/01
- Publicized
- Online ISSN
- DOI
- Type of Manuscript
- Special Section PAPER (Special Issue on Microwave and Millimeter Wave Technology)
- Category
Authors
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Takashi SHIMIZU, Zhewang MA, Yoshio KOBAYASHI, "Design of a Grooved Circular Cavity for Dielectric Substrate Measurements in Millimeter Wave Region" in IEICE TRANSACTIONS on Electronics,
vol. E86-C, no. 8, pp. 1715-1720, August 2003, doi: .
Abstract: A grooved circular cavity is designed for the millimeter wave measurements of dielectric substrates. The grooves are introduced to separate the degenerate TE01p and TM11p modes in circular cavities. A rigorous mode-matching method is used to investigate the influence of grooves on both the TE01p and TM11p modes. The dimensions of the grooves are determined from the numerical results. Comparative experiments of circular cavities with and without grooves validate the design method.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/e86-c_8_1715/_p
Copy
@ARTICLE{e86-c_8_1715,
author={Takashi SHIMIZU, Zhewang MA, Yoshio KOBAYASHI, },
journal={IEICE TRANSACTIONS on Electronics},
title={Design of a Grooved Circular Cavity for Dielectric Substrate Measurements in Millimeter Wave Region},
year={2003},
volume={E86-C},
number={8},
pages={1715-1720},
abstract={A grooved circular cavity is designed for the millimeter wave measurements of dielectric substrates. The grooves are introduced to separate the degenerate TE01p and TM11p modes in circular cavities. A rigorous mode-matching method is used to investigate the influence of grooves on both the TE01p and TM11p modes. The dimensions of the grooves are determined from the numerical results. Comparative experiments of circular cavities with and without grooves validate the design method.},
keywords={},
doi={},
ISSN={},
month={August},}
Copy
TY - JOUR
TI - Design of a Grooved Circular Cavity for Dielectric Substrate Measurements in Millimeter Wave Region
T2 - IEICE TRANSACTIONS on Electronics
SP - 1715
EP - 1720
AU - Takashi SHIMIZU
AU - Zhewang MA
AU - Yoshio KOBAYASHI
PY - 2003
DO -
JO - IEICE TRANSACTIONS on Electronics
SN -
VL - E86-C
IS - 8
JA - IEICE TRANSACTIONS on Electronics
Y1 - August 2003
AB - A grooved circular cavity is designed for the millimeter wave measurements of dielectric substrates. The grooves are introduced to separate the degenerate TE01p and TM11p modes in circular cavities. A rigorous mode-matching method is used to investigate the influence of grooves on both the TE01p and TM11p modes. The dimensions of the grooves are determined from the numerical results. Comparative experiments of circular cavities with and without grooves validate the design method.
ER -
English
