IEICE TRANSACTIONS on Electronics
Transmission Characteristics Control of 120 GHz-Band Bandstop Filter by Coupling Alignment-Free Lattice Pattern
Summary :
In this paper, we present the transmission characteristics control of a 125 GHz-band split-ring resonator (SRR) bandstop filter by coupling an alignment-free lattice pattern. We demonstrate that the transmission characteristics of the SRR filter can be controlled by coupling the lattice pattern; however, the required accuracy of alignment between the SRR filter and lattice pattern was below 200 µm. Therefore, we designed an alignment-free lattice pattern whose unit cell size is different from that of the SRR unit cell. S21 of the SRR bandstop filter changes from -38.7 to -4.0 dB at 125 GHz by arranging the alignment-free lattice pattern in close proximity to the SRR stopband filter without alignment. A 10 Gbit/s data transmission can be achieved over a 125 GHz-band wireless link by setting the alignment-free lattice pattern substrate just above the SRR bandstop filter.
- Publication
- IEICE TRANSACTIONS on Electronics Vol.E104-C No.10 pp.587-595
- Publication Date
- 2021/10/01
- Publicized
- 2021/04/08
- Online ISSN
- 1745-1353
- DOI
- 10.1587/transele.2021MMP0001
- Type of Manuscript
- Special Section PAPER (Special Section on Microwave and Millimeter-Wave Technologies)
- Category
Authors
Akihiko HIRATA
Chiba Institute of Technology
Koichiro ITAKURA
Chiba Institute of Technology
Taiki HIGASHIMOTO
Osaka University
Yuta UEMURA
Osaka University
Tadao NAGATSUMA
Osaka University
Takashi TOMURA
Tokyo Institute of Technology
Jiro HIROKAWA
Tokyo Institute of Technology
Norihiko SEKINE
National Institute of Information and Communications Technology
Issei WATANABE
National Institute of Information and Communications Technology
Akifumi KASAMATSU
National Institute of Information and Communications Technology
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Akihiko HIRATA, Koichiro ITAKURA, Taiki HIGASHIMOTO, Yuta UEMURA, Tadao NAGATSUMA, Takashi TOMURA, Jiro HIROKAWA, Norihiko SEKINE, Issei WATANABE, Akifumi KASAMATSU, "Transmission Characteristics Control of 120 GHz-Band Bandstop Filter by Coupling Alignment-Free Lattice Pattern" in IEICE TRANSACTIONS on Electronics,
vol. E104-C, no. 10, pp. 587-595, October 2021, doi: 10.1587/transele.2021MMP0001.
Abstract: In this paper, we present the transmission characteristics control of a 125 GHz-band split-ring resonator (SRR) bandstop filter by coupling an alignment-free lattice pattern. We demonstrate that the transmission characteristics of the SRR filter can be controlled by coupling the lattice pattern; however, the required accuracy of alignment between the SRR filter and lattice pattern was below 200 µm. Therefore, we designed an alignment-free lattice pattern whose unit cell size is different from that of the SRR unit cell. S21 of the SRR bandstop filter changes from -38.7 to -4.0 dB at 125 GHz by arranging the alignment-free lattice pattern in close proximity to the SRR stopband filter without alignment. A 10 Gbit/s data transmission can be achieved over a 125 GHz-band wireless link by setting the alignment-free lattice pattern substrate just above the SRR bandstop filter.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.2021MMP0001/_p
Copy
@ARTICLE{e104-c_10_587,
author={Akihiko HIRATA, Koichiro ITAKURA, Taiki HIGASHIMOTO, Yuta UEMURA, Tadao NAGATSUMA, Takashi TOMURA, Jiro HIROKAWA, Norihiko SEKINE, Issei WATANABE, Akifumi KASAMATSU, },
journal={IEICE TRANSACTIONS on Electronics},
title={Transmission Characteristics Control of 120 GHz-Band Bandstop Filter by Coupling Alignment-Free Lattice Pattern},
year={2021},
volume={E104-C},
number={10},
pages={587-595},
abstract={In this paper, we present the transmission characteristics control of a 125 GHz-band split-ring resonator (SRR) bandstop filter by coupling an alignment-free lattice pattern. We demonstrate that the transmission characteristics of the SRR filter can be controlled by coupling the lattice pattern; however, the required accuracy of alignment between the SRR filter and lattice pattern was below 200 µm. Therefore, we designed an alignment-free lattice pattern whose unit cell size is different from that of the SRR unit cell. S21 of the SRR bandstop filter changes from -38.7 to -4.0 dB at 125 GHz by arranging the alignment-free lattice pattern in close proximity to the SRR stopband filter without alignment. A 10 Gbit/s data transmission can be achieved over a 125 GHz-band wireless link by setting the alignment-free lattice pattern substrate just above the SRR bandstop filter.},
keywords={},
doi={10.1587/transele.2021MMP0001},
ISSN={1745-1353},
month={October},}
Copy
TY - JOUR
TI - Transmission Characteristics Control of 120 GHz-Band Bandstop Filter by Coupling Alignment-Free Lattice Pattern
T2 - IEICE TRANSACTIONS on Electronics
SP - 587
EP - 595
AU - Akihiko HIRATA
AU - Koichiro ITAKURA
AU - Taiki HIGASHIMOTO
AU - Yuta UEMURA
AU - Tadao NAGATSUMA
AU - Takashi TOMURA
AU - Jiro HIROKAWA
AU - Norihiko SEKINE
AU - Issei WATANABE
AU - Akifumi KASAMATSU
PY - 2021
DO - 10.1587/transele.2021MMP0001
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E104-C
IS - 10
JA - IEICE TRANSACTIONS on Electronics
Y1 - October 2021
AB - In this paper, we present the transmission characteristics control of a 125 GHz-band split-ring resonator (SRR) bandstop filter by coupling an alignment-free lattice pattern. We demonstrate that the transmission characteristics of the SRR filter can be controlled by coupling the lattice pattern; however, the required accuracy of alignment between the SRR filter and lattice pattern was below 200 µm. Therefore, we designed an alignment-free lattice pattern whose unit cell size is different from that of the SRR unit cell. S21 of the SRR bandstop filter changes from -38.7 to -4.0 dB at 125 GHz by arranging the alignment-free lattice pattern in close proximity to the SRR stopband filter without alignment. A 10 Gbit/s data transmission can be achieved over a 125 GHz-band wireless link by setting the alignment-free lattice pattern substrate just above the SRR bandstop filter.
ER -
English
