Fabrication of Nanosized Structures on Nafion Membranes by Thermal Nanoimprinting
Summary :
We demonstrated a novel technique to fabricate nanosized structures on a Nafion membrane, using thermal nanoimprinting with a 5 × 5 μm2 square pattern Si mold without any polymer damage. A 24 MPa thermal imprinting pressure was used for 10 min. We observed high aspect ratio (∼1:10) pillars on the surface after imprinting at 200°C. Finally, we used a novel quartz mold with a 200 nm resolution dot pattern.
- Publication
- IEICE TRANSACTIONS on Electronics Vol.E98-C No.2 pp.133-135
- Publication Date
- 2015/02/01
- Publicized
- Online ISSN
- 1745-1353
- DOI
- 10.1587/transele.E98.C.133
- Type of Manuscript
- BRIEF PAPER
- Category
Authors
Nobuya HIROSHIBA
Tohoku University, Nagoya Institute of Technology
Wataru YANO
Nagoya Institute of Technology
Ryuji OKUMURA
Nagoya Institute of Technology
Yo ICHIKAWA
Nagoya Institute of Technology
Keyword
Latest Issue
Copyrights notice of machine-translated contents
The copyright of the original papers published on this site belongs to IEICE. Unauthorized use of the original or translated papers is prohibited. See IEICE Provisions on Copyright for details.
Cite this
Copy
Nobuya HIROSHIBA, Wataru YANO, Ryuji OKUMURA, Yo ICHIKAWA, "Fabrication of Nanosized Structures on Nafion Membranes by Thermal Nanoimprinting" in IEICE TRANSACTIONS on Electronics,
vol. E98-C, no. 2, pp. 133-135, February 2015, doi: 10.1587/transele.E98.C.133.
Abstract: We demonstrated a novel technique to fabricate nanosized structures on a Nafion membrane, using thermal nanoimprinting with a 5 × 5 μm2 square pattern Si mold without any polymer damage. A 24 MPa thermal imprinting pressure was used for 10 min. We observed high aspect ratio (∼1:10) pillars on the surface after imprinting at 200°C. Finally, we used a novel quartz mold with a 200 nm resolution dot pattern.
URL: https://global.ieice.org/en_transactions/electronics/10.1587/transele.E98.C.133/_p
Copy
@ARTICLE{e98-c_2_133,
author={Nobuya HIROSHIBA, Wataru YANO, Ryuji OKUMURA, Yo ICHIKAWA, },
journal={IEICE TRANSACTIONS on Electronics},
title={Fabrication of Nanosized Structures on Nafion Membranes by Thermal Nanoimprinting},
year={2015},
volume={E98-C},
number={2},
pages={133-135},
abstract={We demonstrated a novel technique to fabricate nanosized structures on a Nafion membrane, using thermal nanoimprinting with a 5 × 5 μm2 square pattern Si mold without any polymer damage. A 24 MPa thermal imprinting pressure was used for 10 min. We observed high aspect ratio (∼1:10) pillars on the surface after imprinting at 200°C. Finally, we used a novel quartz mold with a 200 nm resolution dot pattern.},
keywords={},
doi={10.1587/transele.E98.C.133},
ISSN={1745-1353},
month={February},}
Copy
TY - JOUR
TI - Fabrication of Nanosized Structures on Nafion Membranes by Thermal Nanoimprinting
T2 - IEICE TRANSACTIONS on Electronics
SP - 133
EP - 135
AU - Nobuya HIROSHIBA
AU - Wataru YANO
AU - Ryuji OKUMURA
AU - Yo ICHIKAWA
PY - 2015
DO - 10.1587/transele.E98.C.133
JO - IEICE TRANSACTIONS on Electronics
SN - 1745-1353
VL - E98-C
IS - 2
JA - IEICE TRANSACTIONS on Electronics
Y1 - February 2015
AB - We demonstrated a novel technique to fabricate nanosized structures on a Nafion membrane, using thermal nanoimprinting with a 5 × 5 μm2 square pattern Si mold without any polymer damage. A 24 MPa thermal imprinting pressure was used for 10 min. We observed high aspect ratio (∼1:10) pillars on the surface after imprinting at 200°C. Finally, we used a novel quartz mold with a 200 nm resolution dot pattern.
ER -
English
