The search functionality is under construction.

Author Search Result

[Author] Bo-Hee CHOI(2hit)

1-2hit
  • Compact Controlled Reception Pattern Antenna (CRPA) Array Based on Mu-Zero Resonance (MZR) Antenna

    Jae-Gon LEE  Taek-Sun KWON  Bo-Hee CHOI  Jeong-Hae LEE  

     
    PAPER-Antennas and Propagation

      Pubricized:
    2017/12/20
      Vol:
    E101-B No:6
      Page(s):
    1427-1433

    In this paper, a compact controlled reception pattern antenna (CRPA) array based on a mu-zero resonance (MZR) antenna is proposed for a global positioning system (GPS). The MZR antenna can be minimized by designing structure based in mu-negative (MNG) transmission line. The MNG transmission line can be implemented by a gap structure for the series capacitance and a shorting via for a short-ended boundary condition. The CRPA array, which operates in L1 (1.57542GHz) and L2 (1.2276GHz) bands, is designed as a cylinder with a diameter and a height of 127mm (5 inches) and 20mm, respectively, and is composed of seven radiating elements. To design the compact CRPA array with high performance attributes such as an impedance matching (VSWR) value of less than 2, an isolation between array elements (<-12dB), an axial ratio (<5dB), and a circular polarization (CP) gain (>-1dBic: L1 band and >-3dBic: L2 band), we employ two orthogonal MZR antennas, a superstrate, and chip couplers. The performances of the CRPA antenna are verified and compared by an analytic analysis, a full-wave simulation, and measurements.

  • Demonstration of Three-Dimensional Near-Field Beamforming by Planar Loop Array for Magnetic Resonance Wireless Power Transfer

    Bo-Hee CHOI  Jeong-Hae LEE  

     
    PAPER-Antennas and Propagation

      Pubricized:
    2017/01/24
      Vol:
    E100-B No:8
      Page(s):
    1449-1453

    This paper presents a capacitor-loaded 4x4 planar loop array for three-dimensional near-field beamforming of magnetic resonance wireless power transfer (WPT). This planar loop array provides three important functions: beamforming, selective power transfer, and the ability to work alignment free with the receiver. These functions are realized by adjusting the capacitance of each loop. The optimal capacitance of each loop that corresponds to the three functions can be found using a genetic algorithm (GA); the three functions were verified by comparing simulations and measurements at a frequency of 6.78MHz. Finally, the beamforming mechanism of a near-field loop array was investigated using the relationship between the current magnitude and the resonance frequency of each loop, resulting in the findings that the magnitude and the resonance frequency are correlated. This focused current of the specified loop creates a strong magnetic field in front of that loop, resulting in near-field beamforming.