In this paper, a contactless measurement technique of passive intermodulation (PIM) using a coaxial tube excited with standing waves is proposed. The principle of the proposed method is described using a two-port network model with the lumped resistances representing the losses of a specimen and test equipment. To show its validity, a test using nickel wires producing high PIM is carried out, and its PIM-dependency on DUT-position in the coaxial tube is simulated using the FDTD method. The simulated result shows a good agreement to the experiment. Through the examination, it is found that the power consumption by the PIM source in a specimen is essential in PIM production, and sensitive PIM detection does not require good matching condition. Finally, the relation between PIM-source size and generated PIM level is also examined. The result shows that at least 18 dB-PIM reduction is obtained by PIM source size in a half-wavelength conductive wire.

In this letter, we propose a partial impedance-matching method using a two-strip resonator for noncontact Passive Intermodulation (PIM) measurements using a coaxial tube. It is shown that the strip closer to the inner tube of the coaxial tube is dominant in the observed PIM characteristics while both strips are excited equally. The ideal efficiency of power to each strip is 50%, which is a significant improvement in comparison with conventional methods.