The search functionality is under construction.

Author Search Result

[Author] Eunjung CHO(2hit)

1-2hit
  • Dispersion, High-Frequency and Power Characteristics of AlN/GaN Metal Insulator Semiconductor Field Effect Transistors with in-situ MOCVD Deposited Si3N4

    Sanghyun SEO  Eunjung CHO  Giorgi AROSHVILI  Chong JIN  Dimitris PAVLIDIS  Laurence CONSIDINE  

     
    PAPER-GaN-based Devices

      Vol:
    E93-C No:8
      Page(s):
    1245-1250

    The paper presents a systematic study of in-situ passivated AlN/GaN Metal Insulator Semiconductor Field Effect Transistors (MISFETs) with submicron gates. DC, high frequency small signal, large signal and low frequency dispersion effects are reported. The DC characteristics are analyzed in conjunction with the power performance of the device at high frequencies. Studies of the low frequency characteristics are presented and the results are compared with those of AlGaN/GaN High Electron Mobility Transistors (HEMTs). Small signal measurements showed a current gain cutoff frequency and maximum oscillation frequency of 49.9 GHz and 102.3 GHz respectively. The overall characteristics of the device include a peak current density of 335 mA/mm, peak extrinsic transconductance of 130 mS/mm, a maximum output power density of 533 mW/mm with peak power added efficiency (P.A.E.) of 41.3% and linear gain of 17 dB. The maximum frequency dispersion of transconductance and output resistance of the fabricated MISFETs is 20% and 21% respectively.

  • Improvement of CO Sensitivity in GaN-Based Gas Sensors

    Eunjung CHO  Dimitris PAVLIDIS  Guangyuan ZHAO  Seth M. HUBBARD  Johannes SCHWANK  

     
    PAPER-GaN-Based Devices

      Vol:
    E89-C No:7
      Page(s):
    1047-1051

    Pt Schottky diode gas sensors for carbon monoxide (CO) were fabricated using slightly Si doped bulk GaN grown on sapphire substrate. The influence of diode size, Pt thickness, operating temperature on gas sensitivity was investigated. CO sensitivity was improved six times by optimizing the size and thickness of the Pt contact. Surface restructuring and morphology changes of Pt film were observed after thermal annealing. These changes are enhanced as the film thickness is reduced further and contribute to improve CO sensitivity.