Power consumption has become an increasing concern in high performance microprocessor design. Especially, Instruction Cache (I-Cache) contributes a large portion of the total power consumption in a microprocessor, since it is a complex unit and is accessed very frequently. Several studies on low-power design have been presented for the power-efficient cache design. However, these techniques usually suffer from the restrictions in the traditional Instruction Fetch Unit (IFU) architectures where the fetch address needs to be sent to I-Cache once it is available. Therefore, work to reduce the power consumption is limited after the address generation and before starting an access. In this paper, we present a new power-aware IFU architecture, named Analysis Before Starting an Access (ABSA), which aims at maximizing the power efficiency of the low-power designs by eliminating the restrictions on those low-power designs of the traditional IFU. To achieve this goal, ABSA reorganizes the IFU pipeline and carefully assigns tasks for each stages so that sufficient time and information can be provided for the low-power techniques to maximize the power efficiency before starting an access. The proposed design is fully scalable and its cost is low. Compared to a conventional IFU design, simulation results show that ABSA saves about 30.3% fetch power consumption, on average. I-Cache employed by ABSA reduces both static and dynamic power consumptions about 85.63% and 66.92%, respectively. Meanwhile the performance degradation is only about 0.97%.

Modern microprocessors employ caches to bridge the great speed variance between a main memory and a central processing unit, but these caches consume a larger and larger proportion of the total power consumption. In fact, many values in a processor rarely need the full-bit dynamic range supported by a cache. The narrow-width value occupies a large portion of the cache access and storage. In view of these observations, this paper proposes an Adaptive Various-width Data Cache (AVDC) to reduce the power consumption in a cache, which exploits the popularity of narrow-width value stored in the cache. In AVDC, the data storage unit consists of three sub-arrays to store data of different widths. When high sub-arrays are not used, they are closed to save its dynamic and static power consumption through the modified high-bit SRAM cell. The main advantages of AVDC are: 1) Both the dynamic and static power consumption can be reduced. 2) Low power consumption is achieved by the modification of the data storage unit with less hardware modification. 3) We exploit the redundancy of narrow-width values instead of compressed values, thus cache access latency does not increase. Experimental results using SPEC 2000 benchmarks show that our proposed AVDC can reduce the power consumption, by 34.83% for dynamic power saving and by 42.87% for static power saving on average, compared with a cache without AVDC.

Current trends in modern out-of-order processors involve implementing deeper pipelines and a large instruction window to achieve high performance, which lead to the penalty of the branch misprediction recovery being a critical factor in overall processor performance. Multi path execution is proposed to reduce this penalty by executing both paths following a branch, simultaneously. However, there are some drawbacks in this mechanism, such as design complexity caused by processing both paths after a branch and performance degradation due to hardware resource competition between two paths. In this paper, we propose a new recovery mechanism, called Recovery Critical Misprediction (RCM), to reduce the penalty of branch misprediction recovery. The mechanism uses a small trace cache to save the decoded instructions from the alternative path following a branch. Then, during the subsequent predictions, the trace cache is accessed. If there is a hit, the processor forks the second path of this branch at the renamed stage so that the design complexity in the fetch stage and decode stage is alleviated. The most contribution of this paper is that our proposed mechanism employs critical path prediction to identify the branches that will be most harmful if mispredicted. Only the critical branch can save its alternative path into the trace cache, which not only increases the usefulness of a limited size of trace cache but also avoids the performance degradation caused by the forked non-critical branch. Experimental results employing SPECint 2000 benchmark show that a processor with our proposed RCM improves IPC value by 10.05% compared with a conventional processor.