Reducing power consumption is a crucial factor making industrial designs, such as mobile SoCs, competitive. Voltage scaling (VS) is the classical yet most effective technique that contributes to quadratic power reduction. A recent design technique called activation-aware slack assignment (ASA) enhances the voltage-scaling by allocating the timing margin of critical paths with a stochastic mean-time-to-failure (MTTF) analysis. Meanwhile, such stochastic treatment of timing errors is accepted in limited application domains, such as image processing. This paper proposes a design optimization methodology that achieves a mode-wise voltage-scalable (MWVS) design guaranteeing no timing errors in each mode operation. This work formulates the MWVS design as an optimization problem that minimizes the overall power consumption considering each mode duration, achievable voltage lowering and accompanied circuit overhead explicitly, and explores the solution space with the downhill simplex algorithm that does not require numerical derivation and frequent objective function evaluations. For obtaining a solution, i.e., a design, in the optimization process, we exploit the multi-corner multi-mode design flow in a commercial tool for performing mode-wise ASA with sets of false paths dedicated to individual modes. We applied the proposed design methodology to RISC-V design. Experimental results show that the proposed methodology saves 13% to 20% more power compared to the conventional VS approach and attains 8% to 15% gain from the conventional single-mode ASA. We also found that cycle-by-cycle fine-grained false path identification reduced leakage power by 31% to 42%.

This work proposes a design methodology that saves the power dissipation under voltage over-scaling (VOS) operation. The key idea of the proposed design methodology is to combine critical path isolation (CPI) and bit-width scaling (BWS) under the constraint of computational quality, e.g., Peak Signal-to-Noise Ratio (PSNR) in the image processing domain. Conventional CPI inherently cannot reduce the delay of intrinsic critical paths (CPs), which may significantly restrict the power saving effect. On the other hand, the proposed methodology tries to reduce both intrinsic and non-intrinsic CPs. Therefore, our design dramatically reduces the supply voltage and power dissipation while satisfying the quality constraint. Moreover, for reducing co-design exploration space, the proposed methodology utilizes the exclusiveness of the paths targeted by CPI and BWS, where CPI aims at reducing the minimum supply voltage of non-intrinsic CP, and BWS focuses on intrinsic CPs in arithmetic units. From this key exclusiveness, the proposed design splits the simultaneous optimization problem into three sub-problems; (1) the determination of bit-width reduction, (2) the timing optimization for non-intrinsic CPs, and (3) investigating the minimum supply voltage of the BWS and CPI-applied circuit under quality constraint, for reducing power dissipation. Thanks to the problem splitting, the proposed methodology can efficiently find quality-constrained minimum-power design. Evaluation results show that CPI and BWS are highly compatible, and they significantly enhance the efficacy of VOS. In a case study of a GPGPU processor, the proposed design saves the power dissipation by 42.7% with an image processing workload and by 51.2% with a neural network inference workload.