The first implementations of X-band AlGaN/GaN HEMT single-ended frequency doublers are presented in this paper. Two types of fundamental frequency signal reflector schemes have been demonstrated for the frequency doubler application. Open-circuited quarter-wavelength microstrip line at the fundamental frequency is utilized for the reflector in a conventional way. In the other architecture a printed antenna is employed as a radiator as well as a novel fundamental frequency reflector. A microstrip rectangular patch antenna operating at the second harmonic frequency of the doubler was designed and integrated with AlGaN/GaN HEMT based on active integrated antenna design concept. Using AlGaN/GaN HEMT with 1 mm gate periphery, two 4 to 8 GHz frequency doublers were designed by the described design methodologies, fabricated, and tested. For the conventional frequency doubler, a conversion gain of 0.6 dB and with an output power of 15 dBm was observed. A conversion gain of 5 dB and an output power of 25 dBm with embedded antenna gain were achieved at a drain voltage of 12 V for the doubler integrated with the patch antenna.

Integrated implementation of RF front-end components has been shown to posses many benefits. Furthermore, it presents a new way of approaching RF design. This paper will discuss the recent developments by the author's group in the field of RF front-end technology. This will include stand-alone RF front-end components such as a self-heterodyne mixer as well as more functional front-end circuitry such as digital beamformer arrays, retrodirective arrays and an array error calibration scheme.