Sleep-mode operation of a Mobile Subscriber Station (MSS) in IEEE 802.16e effectively saves energy consumption; however, it induces frame response delay. In this letter, we propose an algorithm to quickly find the optimal value of the final sleep interval in sleep-mode in order to minimize energy consumption with respect to a given frame response delay constraint. The validations of our proposed algorithm through analytical results and simulation results suggest that our algorithm provide a potential guidance to energy saving.

In this paper, we develop an analytical model to evaluate the performance of optical burst switching (OBS) node with optical-level buffers for retransmission of blocked bursts. First, currently used burst blocking models and modelling of optical buffers at OBS nodes are shown to be inappropriate as a blocking model for retransmission in OBS nodes. Thus, we propose a new blocking model for the burst transmission mechanism with retransmission technique in an optical-level buffered OBS node. From the numerical analysis, we show the performance enhancement by applying optical buffers for retransmission of blocked bursts in terms of burst blocking probability and link utilization.

Optical Burst Switching (OBS) is one of the most promising switching technologies for next generation optical networks. As delay-sensitive applications such as Voice-over-IP (VoIP) have recently become popular, OBS networks should guarantee stringent Quality of Service (QoS) requirements for such applications. Thus, this paper proposes an Adaptive Loss-aware Flow Control (ALFC) scheme, which adaptively decides on the burst offset time based on loss-rate information delivered from core nodes for assigning a high priority to delay-sensitive application traffic. The proposed ALFC scheme also controls the upper-bounds of the factors inducing delay and jitter for guaranteeing the delay and jitter requirements of delay-sensitive application traffic. Moreover, a piggybacking method used in the proposed scheme accelerates the guarantee of the loss, delay, and jitter requirements because the response time for flow control can be extremely reduced up to a quarter of the Round Trip Time (RTT) on average while minimizing the signaling overhead. Simulation results show that our mechanism can guarantee a 10-3 loss-rate under any traffic load while offering satisfactory levels of delay and jitter for delay-sensitive applications.

Network survivability is one of the most pivotal issues in optical WDM networks. In particular, if a conduit is cut, approximately 16 terabits per millisecond can be lost in recent technology. A huge loss even by a single conduit failure fatally damages the performance and operation of the whole network. In this paper, we propose a new heuristic algorithm, called the Generalized Minimum-Cost (GMC) selection algorithm, to choose a pair of working and backup path which firstly minimizes total number of required wavelengths of working and backup path and secondly distributes lightpath request traffic into whole network links, if there are several pairs to require the same number of minimum wavelengths, in order to achieve load-balancing effect. GMC selection algorithm contains several formulas to get Working and Backup path Reservation Cost (WBRC) which can be obtained through heuristic GMC function. By using WBRC, our GMC selection algorithm achieves superior performance compared to the current Combined Min-Cost (CMC) selection algorithm and random selection algorithm in terms of the amount of wavelength consumption and blocked lightpath requests, especially on the relatively less-connected New Jersey LATA and 28-node US networks. Furthermore, we suggest a maximum number of non-blocked lightpath requests against single link failure in simulated networks for network operators to consider acceptable maximum traffic on their networks, so that they can provide 100% restoration capability in a single link failure without lightpath request blocking. We also analyze the complexity of the GMC selection algorithm and verify that the complexity of the GMC selection algorithm is lower than that of the CMC selection algorithm if the number of lightpath requests is sufficiently large.

Although wavelength division multiplexing-passive optical network (WDM-PON) is known as a high-speed transfer, it creates high channel costs per subscriber and low bandwidth utilization due to the fact that a wavelength is dedicated to each subscriber. Thus, it is imperative to reduce channel costs per subscriber and improve the bandwidth utilization. To achieve these, we first adopt a existing WDM-PON, which uses the bidirectional transmission with a single source for cost-efficiency by employing a gain-saturated reflective semiconductor optical amplifier (RSOA). Secondly, based on the existing WDM-PON, we propose an enhanced hybrid WDM/TDM-PON, which can extend the number of subscribers supported in each wavelength with splitters in the physical layer and a shared-time division duplex (TDD) frame format in the media access control (MAC) layer. Moreover, it can adaptively control the bandwidth through a dynamic bandwidth allocation (DBA) scheme according to the volume of traffic. Compared to the non TDD-based hybrid WDM/TDM-PON, it can reduce channel costs per subscriber from the extended number of subscribers supported in each wavelength. Furthermore, due to the DBA, it can improve the total queueing delay and throughput, and thus increase the bandwidth utilization.

In this letter, we analyze blocking probabilities for prioritized multi-classes in optical burst switching (OBS) networks. The blocking probability of each traffic class can be analytically evaluated by means of class aggregation and iteration method. The analytic results are validated with results garnered from simulation tests.

In this paper, we address how to efficiently support differentiated services with the optimized bandwidth reservation in a polling-based generalized TDMA network like E-PON (Ethernet Passive Optical Network). In E-PON, performances of service differentiation for QoS (Quality of Service) guaranteed multiples services are directly affected by the bandwidth reservation algorithm of ONU (Optical Network Unit) in addition to the priority-based packet scheduling. Our proposed Service Quality Pre-engagement (SQP) algorithm reduces the system buffer size, the light-load penalty problem and the service interference among classes effectively by partially introducing the dynamic forward recurrence reservation scheme for QoS guaranteed classes. We also introduce the FRC(Forward Reservation Class) Selection algorithm that preserves the optimized reservation bandwidth to minimize the unnecessary reservation contentions. These algorithms do not mandate the basic concept of DBA and request the similar amount of REPORT bandwidth. The analytic and simulation results are performed to evaluate the performances of the proposed algorithms.

One of the important issues of future convergence service design in access networks is the ability to support different kinds of video delivery services for high quality IP-TV and multicast Video on Demand (VoD). In this paper, we address how to efficiently allocate video transmission channels based on multicast management technology in shared wavelength division multiplexed-passive optical network (WDM-PON). The shared WDM-PON introduces a broadcast downstream wavelength to support multicast videos in the point-to-point WDM-PON. Based on the shared architecture and multicast management technologies, the proposed dynamic channel scheduling arbitrates transmission channels of videos. It uses the information of broadcast video share to maximize traffic share in the optical layer. By maintaining high video share, proposed algorithm supports the maximum number of high quality multicast videos without serious service interference to real-time videos, delay-able videos, and internet services. In addition, it also reduces the packet processing burden and buffer size of the optical line termination (OLT). The analytic and simulation results validate the effectiveness of the proposed algorithm.

This letter proposes a new adaptive power management mechanism (APM2) which takes into account the remaining energy in an IEEE 802.16e system. Benefits of the mechanism are the reduction of frame response delay in a state with sufficient remaining energy, and an increase in the life of a station in a state of insufficient remaining energy. An analytical model for sleep mode operation is developed, and the proposed mechanism is validated by computer simulation.

Suitably aggregated data burst enhances link utilization and reduces data processing complexity of optical transport networks rather than just transmitting each bursty input traffic from access networks. This data burst generation method is called as a burst assembly process and has two assembly parameters, timer and threshold, for regulating burst release time and burst size. Since the traffic characteristics of data burst generated at the burst assembler may affect network performance, the decision of burst assembly parameters should be carefully designed. Thus, in this paper we study the dimensioning burst assembly process to find the burst assembly parameter values satisfying target performance. For this purpose, we first analyze timer-based and threshold-based burst assembly processes, respectively. As constraints on the dimensioning burst assembly process, we consider the following performance metrics: 1) processing delay of control packet, 2) burst loss at control plane, and 3) link utilization. Based on these constraints, a decision mechanism of the burst assembly parameters is proposed. From numerical analysis, we suggest a possible lower boundary value for the burst assembly parameters satisfying the target burst loss rate and delay time at the control plane.