In this paper, Constrained Interpolation Profile (CIP) method is applied to Maxwell's equation including complex permittivity and permeability and the validity of CIP method applied to the equation is confirmed compared with the FDTD method. And the dependency on CFL (Courant-Friedrich-Lewy) condition, cell size and estimates of , and of the absorbing characteristics of one-layer EM-absorber are calculated using CIP method and compared with that by FDTD method. As a result, it is confirmed that the characteristics obtained by CIP method is different from that by FDTD method.

Utilization of electromagnetic absorbers under high power is increasing. The absorbers are used in anechoic chambers for performance estimation of high power radars. Variation of the absorption characteristics of the absorbers under such conditions is expected, due to the generation of heat or temperature change. In this paper, first the temperature distribution of a λ/4 type EM-wave absorber under high power injection is examined using the coupled method. The coupled method can calculate the electromagnetic field and all of the heat transmissions (heat transport, heat transfer and heat radiation). Next, the power injection experiment is examined using the absorber and high power instruments to get the temperature distribution experimentally. Finally the calculated and measured temperature distributions of the absorber are compared and discussed.

We have proposed a tunable laser with silica-waveguide ring resonators. In this tunable laser, a semiconductor optical amplifier was passively aligned and mounted onto a silica-waveguide substrate. The ring resonators can be tuned by controlling their temperatures using the thermo optic heaters formed on them, and there are no mechanically moving parts. Thus, they are sufficiently stable and reliable for practical use. Our tunable laser exhibits a high fiber-output power of more than 15 dBm and a wide tunable range of 60 nm (L-band, 50 GHz spacing, 147 channels). Moreover, a tunable laser with a much wider tunable range of 96 nm using 100-GHz-FSR ring resonators is also reported.

This paper focuses on the characteristics of tunable half-wavelength resonators and their applications to bandpass filters (BPFs). First, the resonance characteristics of various tunable half-wavelength resonators are examined for the tunabilities of transmission zeros and the center frequency of the proposed BPFs. We examine four types of tunable half-wavelength resonators, namely, an end-coupling resonator and three types of tap-coupling resonators. Secondly, the proposition and design of two types of BPFs using acquired resonators are carried out. The fabrication and experimental application of the resonators and designed BPFs are also performed based on coplanar waveguide (CPW) technologies. Their calculated and measured results are compared with each other. The results show that tunabilities of the transmission zero and the center frequency of the proposed BPF are obtained as expected.

In this paper, first the temperature distribution of the pyramidal EM-wave absorber is calculated in the coupled method. Next, the injected power to the EM-wave absorber is changed to estimate the maximum power density that the EM-wave absorber can resist. As a result, the limitation of the injecting power density to a pyramidal EM-wave absorber is achievable.