A novel voltage level controller for low-power charge pump converters will be presented in this paper. The proposed voltage level controller would react according to the pumped voltage in the charge-transfer-switch (CTS) converter. For the CTS circuit, the pumping operation would be degraded by the charge sharing effect in the auxiliary switch path. In this study, a voltage shifter was used as the voltage level controller to overcome this serious problem without consuming too much chip area. The simulation results showed that the converter can accept a rated input of 1.5 V and generated an output up to 8 V based on the TSMC 0.35-µm CMOS technology. The layout consumed an area of 125*160 µm2. The highest output obtained in measuring the real chip was 5.5 V which is primarily due to the limitation that the transistor could tolerated. The largest load was estimated as high as 6 mW which is large enough for on-chip application.