We demonstrate the wide-band (> 25-nm) long-distance (> 1000-km) chromatic dispersion compensation by midway spectral inversion (MSI) using a periodically-polled LiNbO3 device. In order to achieve a flat zero net dispersion, the fourth order dispersion of the single-mode fibers is canceled by MSI, while the third order dispersion is compensated for by the negative slope dispersion compensation fiber (NS-DCF). The second order dispersion is canceled out by both. The long distance propagation is realized by a double recirculation-loop system. A very flat zero dispersion is measured for the first time for over 1000-km single-mode fiber propagation with MSI dispersion compensation.

We have developed the tunable dispersion compensator based on two twin linearly chirped fiber Bragg gratings with various temperature gradients. Controlling the temperature gradient over one of the twin fiber Bragg gratings by Peltier elements, the dispersion and the dispersion slope were changed independently and continuously. The dispersion and dispersion slope compensator has a large bandwidth of 8 nm and low group-delay ripple of < 4 ps in its chirped fiber Bragg gratings. We experimentally demonstrated a precise controllability of the dispersion and the dispersion slope using linear and parabolic temperature gradient. The dispersion and the dispersion slope changes were achieved continuously with -0.67 ps/nm/ and -0.14 ps/nm2/. The transmission characteristics of the dispersion slope compensation were examined using ultra short pulses in the fiber link. When the total dispersion was zero, the distorted pulse was restored back and the tail was significantly suppressed. 160 Gbit/s signals were also demonstrated over 140 km within 1 dB power penalty by using the dispersion slope compensator.