In erbium doped optical fiber amplifiers (EDFAs) used in modern high-capacity wavelength division multiplexing (WDM) systems, the gain flatness of EDFA is very important in wide-band long-haul systems. In the EDFAs using the passive gain equalizers, the gain flatness deteriorates due to gain-tilt when the operating condition of the EDFA changes, while the EDFAs should maintain the gain flatness even if the operating condition has changed. To solve this problem, we have developed an active gain-slope compensation technique of an EDFA using a thulium-doped optical fiber (TDF) as a saturable absorber. The actively gain-slope compensated EDFA with the TDF compensator keeps the gain profile constant for the wide gain dynamic range more than 8 dB with the low noise figure less than 6 dB in the wavelength range of 1539-1564 nm.

A novel technique is proposed to fabricate a chirped fiber Bragg grating utilizing thermal diffusion of core dopant. The chirped grating is written with a uniform period by using UV exposure technique in the fiber whose effective index of the guided mode varies along its length. Thermal diffusion of the core dopant it employed to realize this change of the effective index. Through the thermal diffusion process, the effective index of the fiber decreases from its initial value. When the grating is written in the diffused core region, its reflection wavelength becomes shorter than that in the non-diffused region. The continuous change of effective index is required for making a chirped grating. The fiber is heated by a non-uniform heat source. When the uniform grating is written in this region, the reflection wavelength smoothly changes along the fiber length although the grating period is constant. By optimizing the fiber parameters to realize a highly chirped grating, we have obtained a typical one whose bandwidth is 14.1 nm at half maximum and maximum rejection in transmission is 29 dB. Additionally, the proposed method has an advantage to control the chirp profile with high mechanical reliability.

Permission warnings and privacy policy enforcement are widely used to inform mobile app users of privacy threats. These mechanisms disclose information about use of privacy-sensitive resources such as user location or contact list. However, it has been reported that very few users pay attention to these mechanisms during installation. Instead, a user may focus on a more user-friendly source of information: text description, which is written by a developer who has an incentive to attract user attention. When a user searches for an app in a marketplace, his/her query keywords are generally searched on text descriptions of mobile apps. Then, users review the search results, often by reading the text descriptions; i.e., text descriptions are associated with user expectation. Given these observations, this paper aims to address the following research question: What are the primary reasons that text descriptions of mobile apps fail to refer to the use of privacy-sensitive resources? To answer the research question, we performed empirical large-scale study using a huge volume of apps with our ACODE (Analyzing COde and DEscription) framework, which combines static code analysis and text analysis. We developed light-weight techniques so that we can handle hundred of thousands of distinct text descriptions. We note that our text analysis technique does not require manually labeled descriptions; hence, it enables us to conduct a large-scale measurement study without requiring expensive labeling tasks. Our analysis of 210,000 apps, including free and paid, and multilingual text descriptions collected from official and third-party Android marketplaces revealed four primary factors that are associated with the inconsistencies between text descriptions and the use of privacy-sensitive resources: (1) existence of app building services/frameworks that tend to add API permissions/code unnecessarily, (2) existence of prolific developers who publish many applications that unnecessarily install permissions and code, (3) existence of secondary functions that tend to be unmentioned, and (4) existence of third-party libraries that access to the privacy-sensitive resources. We believe that these findings will be useful for improving users' awareness of privacy on mobile software distribution platforms.

In modern high-capacity wavelength division multiplexing (WDM) transmission systems, there is increasing demand for large transmission capacity. To achieve this purpose, an L-band (1565-1625 nm) erbium-doped fiber amplifier (EDFA) is very effective method because the conventional silica-based EDF can be used. In EDFAs that used in WDM transmission systems, the gain flatness of EDFA is very important. A passive gain equalizer flattens the gain profile of EDFA. But the gain flatness in L-band deteriorates due to dynamic gain-tilt (DGT) and temperature gain-tilt (TGT) when the operating condition of the EDFA changes, while the EDFAs should maintain the gain flatness even if the operating condition has changed. To solve this problem, we propose an active gain-slope compensation technique for the L-band EDFA using a thulium-doped fiber (TDF). The EDFA actively gain-slope compensated by the TDF compensator keeps the gain profile constant for the wide input power range of more than 8 dB, a wide temperature range of 65 without gain-tilt in a wavelength band between 1575 nm and 1610 nm. Furthermore, the EDFA keeps a low noise figure of less than 7.5 dB.

In erbium doped optical fiber amplifiers (EDFAs) used in modern high-capacity wavelength division multiplexing (WDM) systems, the gain flatness of EDFA is very important in wide-band long-haul systems. In the EDFAs using the passive gain equalizers, the gain flatness deteriorates due to gain-tilt when the operating condition of the EDFA changes, while the EDFAs should maintain the gain flatness even if the operating condition has changed. To solve this problem, we have developed an active gain-slope compensation technique of an EDFA using a thulium-doped optical fiber (TDF) as a saturable absorber. The actively gain-slope compensated EDFA with the TDF compensator keeps the gain profile constant for the wide gain dynamic range more than 8 dB with the low noise figure less than 6 dB in the wavelength range of 1539-1564 nm.