We present the first demonstration of multiple-stage wavelength conversion using cascaded LiNbO3 Mach-Zehnder SSB modulators. Wavelength is accurately shifted by 18 GHz at each stage. 72 GHz frequency shift with the relative intensity noise (RIN) value of -144.5 dB/Hz is achieved by four stages. The achieved equivalent noise figure is 7.5 dB.

In order to further reduce the transmission rate of multi-channel satellite broadcast signals, whose carrier-to-noise ratio (CNR fluctuates due to rainfall attenuation, we propose a novel digitized radio-over-fiber (DRoF) -based optical re-transmission system based on adaptive combination compression for ultra-high definition (UHD) broadcasting satellite (BS)/communications satellite (CS) broadcast signals. The proposed system reduces the optical re-transmission rate of BS/CS signals as much as possible while handling input CNR fluctuations. Therefore, the transmission rate of communication signals in time-division multiplexing (TDM) transmission is ensured, and network sharing of communication signals and broadcast signals via passive optical network (PON) is realized. Based on the ITU-R P.618-13 prediction model, an experimental evaluation is performed using estimates of the long-term statistics of attenuation due to rainfall. The attenuation is evaluated as a percentage of the time that long-term re-transmission service is available. It is shown that the proposed system is able to accommodate a wide range of rainfall attenuation and achieve a 99.988% time percentage for the duration of service provision. In order to show the rate reduction effect of the proposed system, the quantization bit reduction effect as a function of the input CNR, which depends on rainfall attenuation, is experimentally confirmed. Experiments show that service operation time of 99.978% can be achieved by 3-bit transmission. This means a 62.5% reduction in transmission rate is realized compared to conventional fixed quantization. Furthermore, the average quantization bit number in our system for service operation times is 3.000, indicating that most service operation times are covered by just 3-bit transmission.

This paper clarifies the sideband suppression ratio (SSR) value needed for multi-carrier signal modulation in an optical single sideband (SSB) modulator. An SSR value of about 25 dB is found to be sufficient for broadcast satellite (BS) multi-carrier signal modulation. For FM converted CATV signal modulation, an SSR value of about 10 dB is sufficient. In addition, the properties of cascaded lithium niobate Mach-Zehndar (LN MZ) optical SSB modulators are clarified to be better than those of the conventional single LN MZ optical SSB modulator with nearly the same SSR value of 27 dB.

FM converted CATV and super high frequency satellite TV signal transmission using lithium niobate Mach-Zehnder optical SSB modulator is proposed and demonstrated. Simultaneous FM-converted 40 CATV signal carriers (from 93 to 375 MHz) and 104 super high frequency satellite TV signal carriers (from 11.7 to 20.2 GHz) could be transmitted with good noise properties and distortion quality over 40 km of dispersive SMF with chromatic dispersion of 680 ps/nm. We clarify the required phase and power values by experiments on the relationship between sideband suppression ratio (SSR) and the phase/power to LN MZ optical SSB modulator. For instance, the absolute value of phase and power should be less than 5 degrees and 0.4 dB, respectively, to obtain SSR values above 35 dB.

This paper starts by describing the advantages of cascaded modulation, i.e., using multiple concatenated external modulators to modulate CW (Continuous Wave) light. Next, the paper examines computer simulations of the resulting modulated light waveform shapes and intermodulation distortion values to elucidate the basic modulation characteristics of a cascaded modulation scheme. Examples of applying cascaded modulation to a multi-channel optical signal transmission system are shown, and the characteristics are clarified by optical transmission experiments. For example, the dependency of the signal quality on the modulation depth values of each external modulator is clarified. Moreover, experiments show that cascaded modulation permits the remote insertion of local broadcast programs into wide area broadcast programs. Last, the paper shows that cascaded modulation offers better modulation properties than the conventional single modulation approach.

We propose a scheme by which Broadcast Satellite/Communication Satellite- radio frequency (BS/CS-RF) converted TV signals are transmitted over optical fiber, and also propose a simultaneous Frequency Modulation (FM) converted CATV and BS/CS-RF converted TV optical transmission system as one of its applications. To confirm the proposals, we demonstrate the simultaneous transport of FM converted CATV signals and BS/CS-RF converted TV signals over a single optical fiber. In the experiments, 40 carriers of AM-VSB CATV channels, 30 carriers of 64-QAM digital TV channels, 8 carriers of FM/TC8PSK BS-TV channels, and 12 carriers of QPSK CS-TV channels are simultaneously transmitted. For optical access network application, the practical transmission length of 15 km over 1.3 µm-zero-dispersion optical fiber can be achieved by using dispersion compensation fiber (DCF).

We propose frequency shifted optical single sideband (OSSB), a novel OSSB modulation scheme. It uses a continuous wave to up-convert the source signal, and the signal and the continuous wave then undergo suppressed carrier OSSB modulation simultaneously. This scheme inherently has no unwanted sidebands, even if the suppressed carrier OSSB modulator is defective. Experiments of 12 GHz RF signal transmission confirm that it achieves 2.4 dB relaxation in chromatic dispersion power fading under the condition of 15 dB SSR.

This paper describes the distortion properties created by self-phase modulation in super wideband FM converted 40 AM/30 64-QAM CATV and super-high-frequency RF converted 8 BS/12 CS TV signal transmission based on the optical SSB modulation scheme.

Cloud gaming systems allow users to play games that require high-performance computational capability on their mobile devices at any location. However, playing games through cloud gaming systems increases the Round-Trip Time (RTT) due to increased network delay. To simulate a local gaming experience for cloud users, we must minimize RTTs, which include network delays. The speculative video transmission pre-generates and encodes video frames corresponding to all possible user inputs and sends them to the user before the user’s input. The speculative video transmission mitigates the network, whereas a simple solution significantly increases the video traffic. This paper proposes tile-wise delta detection for traffic reduction of speculative video transmission. More specifically, the proposed method determines a reference video frame from the generated video frames and divides the reference video frame into multiple tiles. We calculate the similarity between each tile of the reference video frame and other video frames based on a hash function. Based on calculated similarity, we determine redundant tiles and do not transmit them to reduce traffic volume in minimal processing time without implementing a high compression ratio video compression technique. Evaluations using commercial games showed that the proposed method reduced 40-50% in traffic volume when the SSIM index was around 0.98 in certain genres, compared with the speculative video transmission method. Furthermore, to evaluate the feasibility of the proposed method, we investigated the effectiveness of network delay reduction with existing computational capability and the requirements in the future. As a result, we found that the proposed scheme may mitigate network delay by one to two frames, even with existing computational capability under limited conditions.