For variation-aware capacitance extraction, stochastic collocation method (SCM) based on Homogeneous Chaos expansion has the exponential convergence rate for Gaussian geometric variations, and is considered as the optimal solution using a quadratic model to model the parasitic capacitances. However, when geometric variations are measured from the real test chip, they are not necessarily Gaussian, which will significantly compromise the exponential convergence property of SCM. In order to pursue the exponential convergence, in this paper, a generalized stochastic collocation method (gSCM) based on generalized Polynomial Chaos (gPC) expansion and generalized Sparse Grid quadrature is proposed for variation-aware capacitance extraction that further considers the arbitrary random probability of real geometric variations. Additionally, a recycling technique based on Minimum Spanning Tree (MST) structure is proposed to reduce the computation cost at each collocation point, for not only "recycling" the initial value, but also "recycling" the preconditioning matrix. The exponential convergence of the proposed gSCM is clearly shown in the numerical results for the geometric variations with arbitrary random probability.

In this paper, a novel intra-die spatial correlation extraction method referred to as MLEMTC (Maximum Likelihood Estimation for Multiple Test Chips) is presented. In the MLEMTC method, a joint likelihood function is formulated by multiplying the set of individual likelihood functions for all test chips. This joint likelihood function is then maximized to extract a unique group of parameter values of a single spatial correlation function, which can be used for statistical circuit analysis and design. Moreover, to deal with the purely random component and measurement error contained in measurement data, the spatial correlation function combined with the correlation of white noise is used in the extraction, which significantly improves the accuracy of the extraction results. Furthermore, an LU decomposition based technique is developed to calculate the log-determinant of the positive definite matrix within the likelihood function, which solves the numerical stability problem encountered in the direct calculation. Experimental results have shown that the proposed method is efficient and practical.

A new optimal nonlinear regulator design method is developed by applying a multi-layered neural network and a fixed point theorem for a nonlinear controlled system. Based on the calculus of variations and the fixed point theorem, an optimal control law containing a nonlinear mapping of the state can be derived. Because the neural network has not only a good learning ability but also an excellent nonlinear mapping ability, the neural network is used to represent the state nonlinear mapping after some learning operations and an optimal nonlinear regulator may be formed. Simulation demonstrates that the new nonlinear regulator is quite efficient and has a good robust performance as well.

In this paper, a Stochastic Collocation Algorithm combined with Sparse Grid technique (SSCA) is proposed to deal with the periodic steady-state analysis for nonlinear systems with process variations. Compared to the existing approaches, SSCA has several considerable merits. Firstly, compared with the moment-matching parameterized model order reduction (PMOR) which equally treats the circuit response on process variables and frequency parameter by Taylor approximation, SSCA employs Homogeneous Chaos to capture the impact of process variations with exponential convergence rate and adopts Fourier series or Wavelet Bases to model the steady-state behavior in time domain. Secondly, contrary to Stochastic Galerkin Algorithm (SGA), which is efficient for stochastic linear system analysis, the complexity of SSCA is much smaller than that of SGA for nonlinear case. Thirdly, different from Efficient Collocation Method, the heuristic approach which may result in "Rank deficient problem" and "Runge phenomenon," Sparse Grid technique is developed to select the collocation points needed in SSCA in order to reduce the complexity while guaranteing the approximation accuracy. Furthermore, though SSCA is proposed for the stochastic nonlinear steady-state analysis, it can be applied to any other kind of nonlinear system simulation with process variations, such as transient analysis, etc.

In this paper, we propose an Adaptive Stochastic Collocation Method for block-based Statistical Static Timing Analysis (SSTA). A novel adaptive method is proposed to perform SSTA with delays of gates and interconnects modeled by quadratic polynomials based on Homogeneous Chaos expansion. In order to approximate the key atomic operator MAX in the full random space during timing analysis, the proposed method adaptively chooses the optimal algorithm from a set of stochastic collocation methods by considering different input conditions. Compared with the existing stochastic collocation methods, including the one using dimension reduction technique and the one using Sparse Grid technique, the proposed method has 10x improvements in the accuracy while using the same order of computation time. The proposed algorithm also shows great improvement in accuracy compared with a moment matching method. Compared with the 10,000 Monte Carlo simulations on ISCAS85 benchmark circuits, the results of the proposed method show less than 1% error in the mean and variance, and nearly 100x speeds up.

In this paper, we propose a Modified nested sparse grid based Adaptive Stochastic Collocation Method (MASCM) for block-based Statistical Static Timing Analysis (SSTA). The proposed MASCM employs an improved adaptive strategy derived from the existing Adaptive Stochastic Collocation Method (ASCM) to approximate the key operator MAX during timing analysis. In contrast to ASCM which uses non-nested sparse grid and tensor product quadratures to approximate the MAX operator for weakly and strongly nonlinear conditions respectively, MASCM proposes a modified nested sparse grid quadrature to approximate the MAX operator for both weakly and strongly nonlinear conditions. In the modified nested sparse grid quadrature, we firstly construct the second order quadrature points based on extended Gauss-Hermite quadrature and nested sparse grid technique, and then discard those quadrature points that do not contribute significantly to the computation accuracy to enhance the efficiency of the MAX approximation. Compared with the non-nested sparse grid quadrature, the proposed modified nested sparse grid quadrature not only employs much fewer collocation points, but also offers much higher accuracy. Compared with the tensor product quadrature, the modified nested sparse grid quadrature greatly reduced the computational cost, while still maintains sufficient accuracy for the MAX operator approximation. As a result, the proposed MASCM provides comparable accuracy while remarkably reduces the computational cost compared with ASCM. The numerical results show that with comparable accuracy MASCM has 50% reduction in run time compared with ASCM.

Due to the superior performance, deep learning has been widely applied to various applications, including image classification, bioinformatics, and cybersecurity. Nevertheless, the research investigations on deep learning in the adversarial environment are still on their preliminary stage. The emerging adversarial learning methods, e.g., generative adversarial networks, have introduced two vital questions: to what degree the security of deep learning with the presence of adversarial examples is; how to evaluate the performance of deep learning models in adversarial environment, thus, to raise security advice such that the selected application system based on deep learning is resistant to adversarial examples. To see the answers, we leverage image classification as an example application scenario to propose a framework of Evaluating Deep Learning for Image Classification (EDLIC) to conduct comprehensively quantitative analysis. Moreover, we introduce a set of evaluating metrics to measure the performance of different attacking and defensive techniques. After that, we conduct extensive experiments towards the performance of deep learning for image classification under different adversarial environments to validate the scalability of EDLIC. Finally, we give some advice about the selection of deep learning models for image classification based on these comparative results.